2003 260DA holding tank disconnected by previous owner, how to re connect electronically?

Discussion in 'Electronics Q&A' started by Punkray, May 22, 2020.

  1. Punkray

    Punkray New Member

    Aug 29, 2019
    Sea Ray 275 2003
    V8 5.0 MPI
    Hi all,

    I just bought a 2003 260DA with a vacuflush with holding tank. The vacuflush works fine and flushes directly out of the boat when you turn the key in the head to 'power'. The holding tank has been disconnected by one of the previous owners and I want to reconnect the holding tank. I can re-route the hoses, that's not the problem.

    The waste pump had a cut wire with tape, so i reconnected that wire, but still nothing happens when i turn the key switch in the head. After using the multimeter I found out that the is no power going to the waste pump when I turn the key to the 'pump out' position. Is there a hidden fuse somewhere that I might have missed that has been taken out perhaps?

    Thanks in advance for any ideas

Share This Page

Show Sidebar