340 cockpit filler table

[JimGG]

I am looking for the filler table for 2000 340 sea ray. I have the cockpit table. Or the dimensions for the filler table and a picture of it if possible. Jim Grant cell 519-990-6741

 

[Creekwood]

I am looking for the filler table for 2000 340 sea ray. I have the cockpit table. Or the dimensions for the filler table and a picture of it if possible. Jim Grant cell 519-990-6741

Isn't the cockpit table the filler table? On my 330 the same fibreglass cockpit table is the filler table. This is not my boat, but mine is the same. The table goes sideways to span the gap. In this picture there is a cooler where there is another fibreglass piece and cushion top that fills in the spot by the gunwale.
So four parts fill out the cockpit space into a lounge/bed. The table plus a cushion for its top, the fibreglass piece for the side and its cushion.

 

[CliffA]

Isn't the cockpit table the filler table? On my 330 the same fibreglass cockpit table is the filler table. This is not my boat, but mine is the same. The table goes sideways to span the gap. In this picture there is a cooler where there is another fibreglass piece and cushion top that fills in the spot by the gunwale.
So four parts fill out the cockpit space into a lounge/bed. The table plus a cushion for its top, the fibreglass piece for the side and its cushion.

I believe he has the table but needs the fiberglass filler base that goes beside the table....the table and the fiberglass base both have cushions that go on top to make a large lounging area for sun bathing.....

the filler base and a cushion normally are used to make a seat along the starboard side between the front and aft cockpit seats where the cooler is in the pic....

cliff

 

[Creekwood]

I believe he has the table but needs the fiberglass filler base that goes beside the table....the table and the fiberglass base both have cushions that go on top to make a large lounging area for sun bathing.....

the filler base and a cushion normally are used to make a seat along the starboard side between the front and aft cockpit seats where the cooler is in the pic....

cliff

Yup. That’s what I was trying to explain too. I think a lot of those removable seat base pieces get lost on our boats. Mine stays in the aft berth most of the time because I like the more open cockpit without it. If I go on a trip I put it in the dock box to reduce clutter and put a cooler exactly where it is in the picture I posted.

 

[CliffA]

I do not like the filler seat...it is a PITA to remove and install...I have replaced it with a cooler also...but I will keep the filler seat for when I sell the boat....

good luck to the OP in finding the filler seat base...

cliff