- Jun 5, 2016
- 5,553
- Boat Info
- 410 Sundancer
2001
12" Axiom and 9" Axiom+ MFD
- Engines
- Cat 3126 V-Drives
Calling all Electrical Guru's
Found the diode that I think feeds the K2 and K1 relays to be damaged. I think what was producing the acrid electrical burn smell. The generator will preheat and start up no problem, but the fuel lift pump is not operating when the preheat switch is pressed.
The diode is illegible and the schematic doesn't get into the level of detail needed to order some new ones. I have an email into Westerbeke, but thought I'd post this up and see if I can get the right part on order.
Dave
Found the diode that I think feeds the K2 and K1 relays to be damaged. I think what was producing the acrid electrical burn smell. The generator will preheat and start up no problem, but the fuel lift pump is not operating when the preheat switch is pressed.
The diode is illegible and the schematic doesn't get into the level of detail needed to order some new ones. I have an email into Westerbeke, but thought I'd post this up and see if I can get the right part on order.
Dave