97 searay 330 Systems Monitor

[Rocco]

Does anyone know where I can obtain or get repaired an LED systems monitor for 97 Searay...the module appears to be sealed in plastic....thanks

 

[tdschafer]

Does anyone know where I can obtain or get repaired an LED systems monitor for 97 Searay...the module appears to be sealed in plastic....thanks

That thing is a Unicorn my friend. Sounds like the one that you have is "potted", which means the components are buried in epoxy. There was a company several years back that was repairing the non-potted ones but they couldn't do anything with the potted ones. I had some correspondence with Sea Ray back then but the conversion they felt "may work" was several thousand dollars. Hopefully you will have better luck in your search.

 

[Rocco]

Thanks...what I figured..the labor to install a new one would most likely be off the charts given the degree of difficulty working on V Drives. .let alone the cost of the unit

 

[Creekwood]

That system monitor was really old school and basically just a light board to show what was on and what was not plus very basic oil/temp info. It does absolutely nothing more than you can get from just looking at the gauges and your pump switches. I would buy a replacement woodgrain panel for that hole and think of what might make sense to install in that spot if you want to use it for something.

 

[No Direction]

I have a 97 370 Aft, I have a 12v breaker for a monitoring system that will not reset. I do not have any type of displace panel and have not really looked into this yet. Is this going to be the same type of dinosaur system that is not worth working on?

 

[Rocco]

That system monitor was really old school and basically just a light board to show what was on and what was not plus very basic oil/temp info. It does absolutely nothing more than you can get from just looking at the gauges and your pump switches. I would buy a replacement woodgrain panel for that hole and think of what might make sense to install in that spot if you want to use it for something.

Thanks....my thoughts exactly...I still hate when things don't work though

 

[Rocco]

I have a 97 370 Aft, I have a 12v breaker for a monitoring system that will not reset. I do not have any type of displace panel and have not really looked into this yet. Is this going to be the same type of dinosaur system that is not worth working on?

Try Flounder Pounder...they have several electrical panels on their site