Steve5
New Member
I have a 1996 25ft DA I am looking for an Insert for the Pulpit so the anchor will hang under pulpit. Not sure if Sea Ray has one available or possible alternative Any leads would be appreciated
Anchor Pulpit
- Thread starter Steve5
- Start date
Clam Bake
Member
I looked several years ago but I could never find one that was a complete unit that would allow me not to do any fiberglass rebuilding. Everything I found was sort of like the picture below - you would still need to rebuild all the fiberglass in the front and sides of the insert. Hopefully you can find something - I might use it also 
Attachments
Steve5
New Member
Thanks for the reply looks like what ever I decide to use fiberglass work is definite. Check out this site looks like the best
https://www.anchorlift.com/bow-rollers/
https://www.anchorlift.com/bow-rollers/
NotHerDecision
Well-Known Member
- Jun 28, 2016
- 2,173
- Boat Info
- 2001 Sea Ray 460 Sundancer
2014 Seadoo 155 LTD
2105 Seadoo 130 SE
2013 Mercury Dinghy
- Engines
- Cummins 6CTA 8.3L
How does yours hang now? My 460 has one included.
mwph
Well-Known Member
- Jul 8, 2008
- 3,229
- Boat Info
- 1998 250 DA
- Engines
- 7.4L, B3
I'm all but sure the 96 250DA would have a chute & roller out in front of the pulpit.
As for the OP wanting for it to hang through & below the pulpit..... Sounds to me like like real money and the possibility of introducing a potential water issue to the boat.
As for the OP wanting for it to hang through & below the pulpit..... Sounds to me like like real money and the possibility of introducing a potential water issue to the boat.
