Arch lights

Discussion in 'Modifications/Customizations' started by JTLB, Sep 17, 2019.

  1. JTLB

    JTLB New Member

    23
    Sep 12, 2019
    Michigan
    2005 320 Sundancer
    Mercruiser 350’s with V-Drives
    I know this has been done by tons of members on here, but I’m showing my first mod. ITC Red, white and blue lights. $40 each on Amazon. Super easy. Same mounting holes as original. Just used the same screws since the new ones were slightly smaller. Haven’t had them on at night yet as I did them last Sunday before I left. Seem to work great. Thanks for all the others who have gone before me and made this simple.
    Next up...cutting and installing the memory foam topper.
    Side note: not sure why the pic is turned. Not that way on my phone.
     

    Attached Files:

    Last edited: Sep 18, 2019
    stephens013 likes this.
  2. NotHerDecision

    NotHerDecision Well-Known Member PLATINUM Sponsor

    Jun 28, 2016
    Houston, Texas
    2001 Sea Ray 460 Sundancer
    2014 Seadoo 155 LTD
    2105 Seadoo 130 SE
    2013 Mercury Dinghy
    Cummins 6CTA 8.3L
    To correct the pics all you have to do on your iPhone is click edit then save. You don’t actually have to edit anything.
     
    JTLB likes this.
  3. Jon Paul

    Jon Paul Member

    138
    Sep 24, 2013
    Phoenix
    2006 Sundancer 340
    8.1 V drives
    which lights did you use?
     
    JTLB likes this.
  4. JTLB

    JTLB New Member

    23
    Sep 12, 2019
    Michigan
    2005 320 Sundancer
    Mercruiser 350’s with V-Drives
    These...
     

    Attached Files:

  5. firecadet613

    firecadet613 Well-Known Member

    May 10, 2007
    Indiana
    '07 V358
    T- VP 5.7GXi
    JTLB likes this.
  6. JTLB

    JTLB New Member

    23
    Sep 12, 2019
    Michigan
    2005 320 Sundancer
    Mercruiser 350’s with V-Drives
  7. firecadet613

    firecadet613 Well-Known Member

    May 10, 2007
    Indiana
    '07 V358
    T- VP 5.7GXi
    Kind of pisses me off. On my FW 318, 7 years ago, I went with name brand "Lumitec" lights, had to enlarge the hole. Fiberglass dust over everything. Just picked up a FW 358 and did some digging, these are the same darn lights - cheaper, and like you said, fit the existing screw hole!!!
     

Share This Page

Show Sidebar