EKM
Active Member
My 420AC has two captains chairs that the thru rod in the upper piece is stripped. Its a plastic part (covered in foam and vinyl) that must have a jam nut to allow the rod to thread thru it and it holds the whole back seat together. I'm getting my seats redone so now is the time to fix or replace the piece. Any idea of who made the seat...very common seat used in 460DA as well as many other in the early 2000 era. You can see in the pic that the port side is not tight (pieces separating). The rod runs from the top to the bottom of the seat assy and holds it all together (2 SS threaded rods). Thanks!
