Engine hatch

Everett

New Member
Apr 1, 2022
2
Boat Info
Sea Ray 2014 280 Sun Dancer
LBI AREA
Engines
Mercuiser, 350 Mag, 300 hp
Hi, I just bought a 2014 Sea Ray 280 Sundancer.
1. How do you get engine hatch open with dead batteries?
2. Where can I get a copy of what each fault code means?

Thanks
John
 
try jumping the switch or fuse with alternate battery =Sea Ray manual or direct call for codes
 
If there a small round accesss port on the hatch you open that and pull the pin on the top of the actuator and open by hand.
 
In the original owners pack would have been a jumper wire - connecting a spare battery or jump pack into your 12V accessory outlet. You can make the same thing if you've misplaced it.

You have Smartcraft, right? The readout should tell you what's going on.

What fault codes (if it's not listing it in actual words) are you referring to?

I think there is a Smartcraft owner's manual in your main owner's manual pack.
 
In the original owners pack would have been a jumper wire - connecting a spare battery or jump pack into your 12V accessory outlet. You can make the same thing if you've misplaced it.

You have Smartcraft, right? The readout should tell you what's going on.

What fault codes (if it's not listing it in actual words) are you referring to?

I think there is a Smartcraft owner's manual in your main owner's manual pack.

Thank very much.
 

Forum statistics

Threads
112,942
Messages
1,422,701
Members
60,927
Latest member
Jaguar65
Back
Top