Fresh water distribution manifold

Discussion in 'General Discussion' started by vrcrdavi, May 1, 2017.

  1. vrcrdavi

    vrcrdavi Member

    48
    Nov 17, 2012
    Jacksonville, NC
    2004 300 DA Raymarine C70
    5.0Ls w/Bravo III Drives
    My water manifold developed a leak. After further investigation I found one of the 1/2" male fittings on the manifold is cracked. So I'm going to have to replace it. The manifold has 8 cold and 4 hot leads. Does anyone know where I can get one???:huh:
     
  2. Havana Shamrock

    Havana Shamrock Well-Known Member

    Sep 9, 2008
    Long Island.
    2005 500DB
    QSM11's,
    Honda 30HP
    Sea Doo 90 HP H.O.
  3. Irie308

    Irie308 Member SILVER Sponsor

    690
    May 28, 2013
    CT
    320 Sundancer 2005, Raymarine C120 and C80
    Highfield 9.6 RIB & Tohatsu 8hp
    Previous boat: 215 expre
    350 Mercruisers V-drives
    Are the hoses still available or suitable alternative?
     
  4. vrcrdavi

    vrcrdavi Member

    48
    Nov 17, 2012
    Jacksonville, NC
    2004 300 DA Raymarine C70
    5.0Ls w/Bravo III Drives
    All of the hoses and fittings are fine.
     
  5. Havana Shamrock

    Havana Shamrock Well-Known Member

    Sep 9, 2008
    Long Island.
    2005 500DB
    QSM11's,
    Honda 30HP
    Sea Doo 90 HP H.O.
    The problem is our fittings won't thread onto the new manifold. I had to add adaptors to make them work.
     
  6. Rocket

    Rocket Member GOLD Sponsor

    515
    Jan 14, 2008
    Long Island NY
    2007 48 Sundancer
    Previous: 2004 420DA, 2007 320DA, 2006 240DA
    Cummins QSC 540 8.3
    Post a picture of the fitting. I might have spare fittings from when I rebuilt mine.
     
  7. Havana Shamrock

    Havana Shamrock Well-Known Member

    Sep 9, 2008
    Long Island.
    2005 500DB
    QSM11's,
    Honda 30HP
    Sea Doo 90 HP H.O.
    I read the post as the manifold is cracked, did I miss that?
     
  8. Tsebesy

    Tsebesy New Member

    1
    Mar 22, 2012
    Cedar point ohio
    270 Sundancer
    t-4.3l
    where did you get the adaptors? I have a crack in my manifold and bought a new miniblock. I also made a manifold from 1/2 in pvc but threads are not the same
     

Share This Page

Show Sidebar