Marine Quality Teak Tables - Worldwide Delivery
- Thread starter Marine Teak
- Start date
- Feb 5, 2009
- 827
- Boat Info
- 560DB
2 x Raymarine e125's
Walker Bay Generations 360 Centre Console w. Yahama 60HP
2 Seadoos
- Engines
- CAT 3406e (C15's) @ 800HP
I purchased three table tops from Marine Teak - one of which was custom made. The tables are glorious, the price was reasonable and they were an absolute pleasure to deal with. One of my best service experiences ever!
Paul
Paul
Another shout out to Luke and his team at Marine Teak!!! I installed a new 6' table with two adjustable height pedestals (also from Luke) in my 550DB. Applied 2 coats of Semco natural sealer and couldn't be happier with the product, service, prompt shipping, and reasonable price! Thanks again Luke!
Marine Teak
Member
Thank you for all for the very kind comments. Great pictures as well!
We have had a very busy start to the summer, and ran quite low on stock for some of the most popular ranges of tables, however, everything is now back in stock and available.
More importantly, with the dying UK£ there has never been a better time to have a look at the ranges. Just in the last two weeks, prices to the USA have decreased by around 12% due to the £ v $ exchange rate. And don't forget the CSR Forum discount using code 'RAY10'
Delivery to the States is with UPS taking on average three working days - delivery cost is just $32. All measurements on the site are in both mm and inches (thank you CSR for the tip) and the currency can be changed on the right hand side of every page.
As always, any questions please let me know - we love talking tables !!
Wishing everyone simply the best boating season ever!
Luke
www.MarineTeak.co.uk
We have had a very busy start to the summer, and ran quite low on stock for some of the most popular ranges of tables, however, everything is now back in stock and available.
More importantly, with the dying UK£ there has never been a better time to have a look at the ranges. Just in the last two weeks, prices to the USA have decreased by around 12% due to the £ v $ exchange rate. And don't forget the CSR Forum discount using code 'RAY10'
Delivery to the States is with UPS taking on average three working days - delivery cost is just $32. All measurements on the site are in both mm and inches (thank you CSR for the tip) and the currency can be changed on the right hand side of every page.
As always, any questions please let me know - we love talking tables !!
Wishing everyone simply the best boating season ever!
Luke
www.MarineTeak.co.uk
SeaAyeOwe
Member
- Dec 17, 2013
- 495
- Boat Info
- 2005 Sea Ray Sundancer 320
Merc. 350 MPI Stern Drives
Blue Hull
Zodiac C285S Dinghy w/ Yamaha 15H
- Engines
- 2 x MERCRUISER 350 HORIZON 300 HP gasoline engines w/Bravo III Drives
As a customer in North America - again a great service, great product and the table is wearing really well after two seasons in the sun (and lots of spillage and food stains that are easy to clean off).
No affiliation other than a happy customer.
No affiliation other than a happy customer.
I just ordered a table from marine teak and I need to replace the pedestal floor receptacle, post and table mount.. does any one know where to buy the OEM components ?
sandydlc
Active Member
Update on our table - we still love it and get compliments all the time. We did treat it with Semco as instructed and it was fine initially. After a few dinners where we had drops of an olive oil based salad dressing drip on the table, we had a couple of stains that weren't coming out. I finally broke down and used our teak oil on the table overnight and it looks beautiful again. I highly recommend these tables for our Sea Ray boats and yachts. They are very classy and the folding tables allow room to move around the table better when necessary.
Sandy
Sandy
duplicate
Last edited:
sailor723
New Member
Try Flounder Pounder Marine in Florida. They come up in a Google search. They have a lot of OEM Sea Ray parts.
sailor723
New Member
I'm wondering about the thickness of these tables and how they work as a filler to create the aft sun lounge. The specs show a thickness of 16mm and by contrast the white FG table on my 330 is about 45mm at the edge. Does anyone have any experience using on this way?
Also, it's not clear on the site but do they come with the socket for the pole to go into or do you need to transfer the base from your old table?
Also, it's not clear on the site but do they come with the socket for the pole to go into or do you need to transfer the base from your old table?
scooper321
Well-Known Member
From what I can see, you have to buy the pedestal and mount separately. But I have the same question about mounting. I'd like to use the base that is already on the Flor of my boat cockpit: what pole and table mount would fit that?
Sent from my iPad using Tapatalk...
almostenuff
Member
- Sep 18, 2010
- 477
- Boat Info
- 2005 Sea Ray 390 Sundancer
2002 SeaSwirl 2301 WA
- Engines
- T-380 Cummins
F225 Yamaha
I just removed the mount from my OEM table and reused the OEM pole. No extra cost and no fitment issues
Sent from my iPhone using Tapatalk
sandydlc
Active Member
That's what we did. Originally I was thinking if like the option to switch between tables but I wouldn't want to use anything except our teak table now. I think we should sell our original white table.
Sent from my iPhone using Tapatalk
Marine Teak
Member
Hello!!
With regard to fitting the tables, the simplest way is to unscrew your original fitting and screw it into the new table - this way there is no alterations that need to be made to the mount. However, it is worth having a look at the options available in our "All Pedestals" section as we have some lovely mounts that are quickly removable if required and can also lower to coffee table height - ideal for a new installation as well!
With regard to the depth, our standard flat models are 16mm, and we have many that are also thicker too. 16mm is perfectly fine to use as a bed base. Inside the table is twice epoxied ply which is incredibly strong - much stronger than teak in fact, so these tables will not "bend" under use.
With the US $ being as strong as it is, our prices are even better value for money now - and of course our delivery is just $32 to anywhere in the world for the complete order.
As always, any questions, please let me know - the quickest way is of course to email me at luke@marineteak.co.uk and I always reply within 24 hours at worse - there is a little time difference between us..
Wishing everyone a very merry Christmas and a super New Year !
Luke
www.marineteak.co.uk
With regard to fitting the tables, the simplest way is to unscrew your original fitting and screw it into the new table - this way there is no alterations that need to be made to the mount. However, it is worth having a look at the options available in our "All Pedestals" section as we have some lovely mounts that are quickly removable if required and can also lower to coffee table height - ideal for a new installation as well!
With regard to the depth, our standard flat models are 16mm, and we have many that are also thicker too. 16mm is perfectly fine to use as a bed base. Inside the table is twice epoxied ply which is incredibly strong - much stronger than teak in fact, so these tables will not "bend" under use.
With the US $ being as strong as it is, our prices are even better value for money now - and of course our delivery is just $32 to anywhere in the world for the complete order.
As always, any questions, please let me know - the quickest way is of course to email me at luke@marineteak.co.uk and I always reply within 24 hours at worse - there is a little time difference between us..
Wishing everyone a very merry Christmas and a super New Year !
Luke
www.marineteak.co.uk
juggernaut1
Well-Known Member
- Apr 19, 2015
- 1,152
- Boat Info
- Boatless - sold Searay 38 Sundancer
- Engines
- 8.1’s
Installed Nautic Star Slide.
Sealed with 2 coats of Semco natural sealer and then 2 coats of Semco clear coat for added stain resistance.
Sealed with 2 coats of Semco natural sealer and then 2 coats of Semco clear coat for added stain resistance.
Last edited:
tdschafer
Well-Known Member
That looks great! I like how it looks both open & closed!!
Sent from my SM-J320V using Tapatalk
juggernaut1
Well-Known Member
- Apr 19, 2015
- 1,152
- Boat Info
- Boatless - sold Searay 38 Sundancer
- Engines
- 8.1’s
Thanks,
Also so much more practical than the original table and as you say looks great too.
Also so much more practical than the original table and as you say looks great too.
hagel
Member
I'm looking for a teak table similar to the one in this picture. It needs to mount in a similar fashion. All I'm finding are oval, round, or rectangular tables. Anyone have suggestions on where I could order a table like this one?
http://www.boattest.com/images-gallery/photos/searay_sundancer460_cockpit3_2017.jpg
http://www.boattest.com/images-gallery/photos/searay_sundancer460_cockpit3_2017.jpg
Marine Teak
Member
Hi Michael
We can of course make any size or shape table to suit your requirements. However, as an option, I would take a look at the Lagun Cockpit Mounting System which would suit the same application. The benefit of the Lagun is that the main part of the pedestal is completely removable if the need arises. In addition to this, the table can be moved 360 degrees from two parts giving superb flexibility for positioning. The mount can also be locked in any position.
https://www.marineteak.co.uk/all-pe...-swivelling-cockpit-table-mounting-system-331
With regard to the table, we generally do not build folding triangular tables as shown in your picture. The reason for this is that once the right hand side is folded over the left, you will have two levels. As mentioned, we can build this for you though if required.
Personally I would look at the Lagun shown above, then add the Nautic Star Wing (size depending on the width of the seating) The Wing is a fantastic table - most of the time you just need somewhere to put a drink and some snacks, so it would be in the closed position - however, when needed it opens up to a full size dinner table. Installing this on the Lagun would give you lots of options for positioning.. plus not take up much room in the cockpit when it is not needed. And of course, you can take pretty much everything apart very quickly when you want the whole cockpit back!
https://www.marineteak.co.uk/folding--sliding-teak-tables/nautic-star-wing-54
There are other options of table which will work just as well as the Wing - please do take a look at the range here:- https://www.marineteak.co.uk/folding--sliding-teak-tables
Hope that helps, but as always pop an email over to us and we will do our very best to help!
Luke
PS. Don't forget the Club discount code : 'RAY10'
We can of course make any size or shape table to suit your requirements. However, as an option, I would take a look at the Lagun Cockpit Mounting System which would suit the same application. The benefit of the Lagun is that the main part of the pedestal is completely removable if the need arises. In addition to this, the table can be moved 360 degrees from two parts giving superb flexibility for positioning. The mount can also be locked in any position.
https://www.marineteak.co.uk/all-pe...-swivelling-cockpit-table-mounting-system-331
With regard to the table, we generally do not build folding triangular tables as shown in your picture. The reason for this is that once the right hand side is folded over the left, you will have two levels. As mentioned, we can build this for you though if required.
Personally I would look at the Lagun shown above, then add the Nautic Star Wing (size depending on the width of the seating) The Wing is a fantastic table - most of the time you just need somewhere to put a drink and some snacks, so it would be in the closed position - however, when needed it opens up to a full size dinner table. Installing this on the Lagun would give you lots of options for positioning.. plus not take up much room in the cockpit when it is not needed. And of course, you can take pretty much everything apart very quickly when you want the whole cockpit back!
https://www.marineteak.co.uk/folding--sliding-teak-tables/nautic-star-wing-54
There are other options of table which will work just as well as the Wing - please do take a look at the range here:- https://www.marineteak.co.uk/folding--sliding-teak-tables
Hope that helps, but as always pop an email over to us and we will do our very best to help!
Luke
PS. Don't forget the Club discount code : 'RAY10'
Last edited:
JVM225
Well-Known Member
Does anyone know the brand and model number of the female bracket that mounts to the underside of the stock tables is?
The stock table on my 410 makes little sense as a table but is still a perfect fit for the filler for lounging.
What I'm thinking of doing is getting one of these teak tables in a larger rectangular size, attaching a female bracket to the underside of it to utilize the same size support pole as the original uses and mounting it off to one side of the bottom of the table and then using a fold up leg to support the other side.
The stock table on my 410 makes little sense as a table but is still a perfect fit for the filler for lounging.
What I'm thinking of doing is getting one of these teak tables in a larger rectangular size, attaching a female bracket to the underside of it to utilize the same size support pole as the original uses and mounting it off to one side of the bottom of the table and then using a fold up leg to support the other side.