Need a New Steering Wheel

[Joe Johnson]

Over the winter I want to change out the steering wheel in our 94 210 Signature. I have the correct tools, but was wondering where to go for the wheel itself.

I would also like to clean up the dash panel, it has cracks all over it.

All thoughts and suggestions are appreciated

 

[bobeast]

These steering wheels are fairly universal. You are looking for a ¾" tapered hub. Dozens of examples on Amazon and eBay. I got mine from flounder-pounder (https://www.searay-parts.com/Custom-Steering-Wheel-Cherry-p/stwhw370.htm)

 

[Fill Ess]

You may be able to get a new wheel that fits on your existing hub, otherwise if you can get a matching hub like in Bob's link that is your best bet.

Pop off the middle section of the wheel and you should have 6 allen bolts holding the wheel to the hub. When I went to replace my original wheel, the new wheel had the same bolt spacing but different threads and one of them was stripped so I replaced the hub and I'm glad I had a replacement.

You might have trouble removing the center nut (I didn't) and if you need a puller to separate the hub from the steering shaft, the only thing that worked for me was a 3-jaw puller with flat jaws at the end because there was only a small gap between the end of the hub and the start of the boot that goes over the steering column.