Need Help With Battery Charger

[capecodcruiser]

Hello All, will post this in electrical section as well. I have a pronautic 1240 3 bank charger. I also have the remote display. I was working on the charger recently and the cable for the remote pulled apart from the connector into the charger(see all pics). I called Pronautic and they don't make that unit anymore and don't have schematics or anything. Which I find odd. Does anyone out there have one of these that they could send me a picture of their connector so I can hopefully re pin this thing and get it working again. Would be greatly appreciated.

 

[Lazy Daze]

May be more work than it's worth trying to re-pin it? Cut the other connector off and use butt connectors to crimp the like-colored wires together... or something similar, anyways.

 

[markrsimon]

..appears the other end of the connector is soldered onto the circuit board.

 

[capecodcruiser]

..appears the other end of the connector is soldered onto the circuit board.

Haven't taken it apart yet but that is what I am worried about. I can't believe they have no records of a schematic for this unit. It isn't even 10 years old.

 

[PMC]

I would try calling them again. If i understand the problem, you are looking for the pinout location by color so you can put the connector back together again, correct?

 

[capecodcruiser]

I would try calling them again. If i understand the problem, you are looking for the pinout location by color so you can put the connector back together again, correct?

PMC, yes exactly!! thought it would be a simple process. I have contacted them twice and talked to same person and he was not helpful. Might email with some pictures and see if they respond that way.