Official 240 Sundancer Thread

Discussion in 'Sport Cruisers' started by Shining, Oct 5, 2006.

  1. Glenna

    Glenna New Member

    19
    Sep 17, 2017
    Sundancer 240, 2003
    Mercruiser 5,0 Mpi, Bravo 3
    Hi again!
    It’s now about 70 F in Sweden and I´m in a hurry to get my boat in the water. But I have to install the Wallas-heater on land first and I can´t find a way to remove the strb wall in the mid-cabin, I can´t find any screws. Is there anyone here who have done this and knows?
     
  2. roberteb

    roberteb Member

    124
    Feb 21, 2016
    Netherlands
    240 Sundancer 2004, Lowrance HDS7 3Gen, 3D Scan, TM150, P1, Garmin 300I AIS VHF, Mercury Gateway
    5.0 Mercruiser w/Bravo III
    I have same model (2004)

    You can find the screws a bit covered by upholstery... You can feel the difference when checking..

    Top, approx 1-2 cm from top, 4 screws and my boat 3 screws bottom (2 left - 1 right)...

    Not sure if still have all screws :)
     
  3. roberteb

    roberteb Member

    124
    Feb 21, 2016
    Netherlands
    240 Sundancer 2004, Lowrance HDS7 3Gen, 3D Scan, TM150, P1, Garmin 300I AIS VHF, Mercury Gateway
    5.0 Mercruiser w/Bravo III
    In addition, I ordered the upgrade KISS set, and use the gasbottles... not always have access to shore power. I just remove the canister after 'every' usage...

    Where will you install your Wallas? I was checking the same, but despite gas canister no issue for me, don;t want igniter in my 'engineroom' with petrol engine..

    Greeting from sunny Netherlands
     
  4. Glenna

    Glenna New Member

    19
    Sep 17, 2017
    Sundancer 240, 2003
    Mercruiser 5,0 Mpi, Bravo 3
    Thanks, when You say left and right is it near the corners?
     
  5. Glenna

    Glenna New Member

    19
    Sep 17, 2017
    Sundancer 240, 2003
    Mercruiser 5,0 Mpi, Bravo 3
    Hi, my plan is to install the Wallas behind the box beside the driverseat. I will mount it on the wooden floor thats in there.

    This is the stowe I will replace the Kiss with;
    https://www.skeppamarin.se/dometic-origo-2000.html
     
  6. roberteb

    roberteb Member

    124
    Feb 21, 2016
    Netherlands
    240 Sundancer 2004, Lowrance HDS7 3Gen, 3D Scan, TM150, P1, Garmin 300I AIS VHF, Mercury Gateway
    5.0 Mercruiser w/Bravo III
    Yep, near deck... only on left side one more approx 30cm(?) higher...

    Small magnet can help you to find all :)

    .
     
  7. Glenna

    Glenna New Member

    19
    Sep 17, 2017
    Sundancer 240, 2003
    Mercruiser 5,0 Mpi, Bravo 3
    FINALLY!!!
    After I cut in the upholstery and still couldn´t see any screws, I mounted a handle on the bottom of the wall and took a big pull - and the wall came loose. There was no screws, only pressed in tight.
    Thank You for Your concern!
    Maybe I´ll put my heater in there, plenty of room and (now) easy to remove the wall.
     
  8. roberteb

    roberteb Member

    124
    Feb 21, 2016
    Netherlands
    240 Sundancer 2004, Lowrance HDS7 3Gen, 3D Scan, TM150, P1, Garmin 300I AIS VHF, Mercury Gateway
    5.0 Mercruiser w/Bravo III
    Thanks for sharing info... maybe my sidewall was opened before and later closed with screws...

    Is like IKEA, when assembled, no clue how to take apart :)
     
  9. Holgersson

    Holgersson New Member

    4
    Feb 13, 2017
    Loftahammar, Baltic Sea, Sweden
    SeaRay 240 Sundancer 2000

    Garmin 721xs
    Mercruiser 5.0 EFI Bravo 3
    You better hurry to get the boat in the water, because the Swedish summer is the best day of the year Can You please post som pics after installation? Installing a heater is at top of our wish list for our Sundancer to! To bad that I’m not that handy kind of guy to get it done.
     
  10. Glenna

    Glenna New Member

    19
    Sep 17, 2017
    Sundancer 240, 2003
    Mercruiser 5,0 Mpi, Bravo 3
    :D
     
  11. Glenna

    Glenna New Member

    19
    Sep 17, 2017
    Sundancer 240, 2003
    Mercruiser 5,0 Mpi, Bravo 3
    Shure, I’ll try to take some pictures on Thursday when I’m going to make the installation.
    If You prepare Yourself vid manuals, the right tools and a lot of confidence I don’t think You have to be that handy - and there’s always someone to ask for help, like I do all the time.:)
     
  12. Glenna

    Glenna New Member

    19
    Sep 17, 2017
    Sundancer 240, 2003
    Mercruiser 5,0 Mpi, Bravo 3
    ADF1E7A8-1A3C-4C33-BBE5-12AC3C3F64AA.jpeg
    Finally done, a bad back thousand degrees in the midberth.
     
  13. roberteb

    roberteb Member

    124
    Feb 21, 2016
    Netherlands
    240 Sundancer 2004, Lowrance HDS7 3Gen, 3D Scan, TM150, P1, Garmin 300I AIS VHF, Mercury Gateway
    5.0 Mercruiser w/Bravo III
    Nice, can you post more pics?
     
  14. Glenna

    Glenna New Member

    19
    Sep 17, 2017
    Sundancer 240, 2003
    Mercruiser 5,0 Mpi, Bravo 3
    1048C87D-4C1D-42B6-A7D5-CA67951F5070.jpeg
    Supply back in cabin.
    3563EA0B-822E-452A-8D01-C173284E48B3.jpeg
    Supply by the stairs in v-berth.
    EB171A0E-9DC1-4D0A-86AB-DED9D7C345A4.jpeg
    Panel outside head.
    218FE9A1-E0CE-45A8-9A39-003EAC87053B.jpeg
    Supply in mid-berth and a hatch for fill.
    19740DCA-9DD5-409D-8C50-A141052C4515.jpeg
    Exhaust and air-inlet.
    5285917A-339B-4C0B-A1A5-E2CDC9C9AB1C.jpeg
    Supply near helm.

     
  15. roberteb

    roberteb Member

    124
    Feb 21, 2016
    Netherlands
    240 Sundancer 2004, Lowrance HDS7 3Gen, 3D Scan, TM150, P1, Garmin 300I AIS VHF, Mercury Gateway
    5.0 Mercruiser w/Bravo III
  16. Glenna

    Glenna New Member

    19
    Sep 17, 2017
    Sundancer 240, 2003
    Mercruiser 5,0 Mpi, Bravo 3
    Does anyone know how to get a part list for this boat? I can’t find one that comes with boat.
    Like for the screw covers on windshields.
    8646D80F-34A5-4843-B239-E5C1B63B689C.jpeg
     
  17. bbwhitejr

    bbwhitejr Well-Known Member SILVER Sponsor

    Apr 14, 2013
    Lake Lanier GA
    2007 44DB
    Cummins QSC 8.3s
    Go to www.searay.com and find your parts manual.

    Bennett
     
  18. Glenna

    Glenna New Member

    19
    Sep 17, 2017
    Sundancer 240, 2003
    Mercruiser 5,0 Mpi, Bravo 3
    Thanks, but it is written; "The parts listed are only available through your local authorized Sea Ray dealer."

    I could'nt find it for downloading.
     
  19. bbwhitejr

    bbwhitejr Well-Known Member SILVER Sponsor

    Apr 14, 2013
    Lake Lanier GA
    2007 44DB
    Cummins QSC 8.3s
  20. Glenna

    Glenna New Member

    19
    Sep 17, 2017
    Sundancer 240, 2003
    Mercruiser 5,0 Mpi, Bravo 3

Share This Page

Show Sidebar