Quick Chocks

Discussion in 'Dinghies' started by Morgan Jane, Jun 17, 2021.

  1. Morgan Jane

    Morgan Jane Active Member

    323
    Sep 10, 2010
    Occoquan, VA
    2008 55 Sundancer
    Man 900's
    Just wanted to let you guys know I am a sponsor on this site and we have these products for sale. Thanks for the interest.

    http://parkitwithbill.com/
     
    Jaybeaux, Chris-380, Avenger and 3 others like this.
  2. Avenger

    Avenger Active Member PLATINUM Sponsor

    257
    Nov 29, 2009
    Northern Michigan
    2000 510 Sundancer w/Cats


    1981 Sea Ray 260sxl
    Cat 3196
    Can’t wait to get my set.
     
  3. Shaps

    Shaps Well-Known Member PLATINUM Sponsor

    Nov 4, 2019
    Long Island,NY
    2010 Sundancer 500
    2015 Brig Falcon 330T
    Twin Cummins QSC550 DTS w Zeus
    @Morgan Jane
    I noticed the T-Bar is bowed toward the middle. Is this ok? PXL_20210625_143938254.MP.jpg
     
  4. Morgan Jane

    Morgan Jane Active Member

    323
    Sep 10, 2010
    Occoquan, VA
    2008 55 Sundancer
    Man 900's
    I would have pref
    Very common feature. All units are shipped that way.
     
  5. Irie308

    Irie308 Well-Known Member GOLD Sponsor

    May 28, 2013
    CT
    2004 420 Sedan Bridge, GHS Hydraulic Lift
    Dual Raymarine E120W
    AB Mares 10 VSX with 30 hp Tohatsu
    Cummins 450C 8.3 L Turbocharged
    Are these still in production? Went to refer a friend but the site appears to be down for a while now.
     
  6. Njlarry

    Njlarry Active Member

    216
    May 9, 2021
    Chesapeake bay
    2000 400 DB
    Cat 3126
    Same here.
     
  7. Morgan Jane

    Morgan Jane Active Member

    323
    Sep 10, 2010
    Occoquan, VA
    2008 55 Sundancer
    Man 900's
    Thanks for the post guys. I came to the realization that the prices that I could get for the units were not worth the aggravation and time it took to actually manufacture and ship them. Its as simple as that.
    It is a great product. Works as it should. Made to last. You can take the ones you bought and have them reproduced at a machine shop. Maybe 1 day???
     
  8. Ramblin' Guy

    Ramblin' Guy New Member

    26
    Nov 8, 2021
    1997 370 Sundancer
    370 hp 7.4 MPI Horizon w/V drives
    What are/were they? I want to know what I missed.
     
    sbw1 likes this.
  9. Shaps

    Shaps Well-Known Member PLATINUM Sponsor

    Nov 4, 2019
    Long Island,NY
    2010 Sundancer 500
    2015 Brig Falcon 330T
    Twin Cummins QSC550 DTS w Zeus
    If you can wait til the weekend, i'll post a pic.
     
    Ramblin' Guy likes this.
  10. sbw1

    sbw1 Well-Known Member

    Oct 10, 2006
    West Michigan
    This is listed in my signature
    This is listed in my signature
    I'm wondering the same. What are they used for???
     
  11. Irie308

    Irie308 Well-Known Member GOLD Sponsor

    May 28, 2013
    CT
    2004 420 Sedan Bridge, GHS Hydraulic Lift
    Dual Raymarine E120W
    AB Mares 10 VSX with 30 hp Tohatsu
    Cummins 450C 8.3 L Turbocharged
    Too bad. Based on the alternative I think they were priced pretty low. Glad I got mine early. Can't tell you how many times I've pulled into to a marina and the lift already draws attention, but the ease of the chock removal was the icing on the cake.
     
  12. Shaps

    Shaps Well-Known Member PLATINUM Sponsor

    Nov 4, 2019
    Long Island,NY
    2010 Sundancer 500
    2015 Brig Falcon 330T
    Twin Cummins QSC550 DTS w Zeus
    They allow the chocks in our swim platform to be installed and removed easily. instead of the chock sitting IN the track, the quick chock sits ON the track with what can best be described as a pair of T-Bolts that locks the chock into the channel.
     
    TonyA and Nater Potater like this.
  13. Njlarry

    Njlarry Active Member

    216
    May 9, 2021
    Chesapeake bay
    2000 400 DB
    Cat 3126
    Would it work to simply add the T bolts?
     
  14. Shaps

    Shaps Well-Known Member PLATINUM Sponsor

    Nov 4, 2019
    Long Island,NY
    2010 Sundancer 500
    2015 Brig Falcon 330T
    Twin Cummins QSC550 DTS w Zeus
    Not without modifying the chock itself by removing the part thar goes in the channel
    Picture will make it easier to explain...
     
  15. Shaps

    Shaps Well-Known Member PLATINUM Sponsor

    Nov 4, 2019
    Long Island,NY
    2010 Sundancer 500
    2015 Brig Falcon 330T
    Twin Cummins QSC550 DTS w Zeus
    PXL_20211204_191934175.jpg PXL_20211204_191906473.jpg PXL_20211204_191856556.jpg

    As promised..
     
    Njlarry and Tripsdad like this.
  16. Morgan Jane

    Morgan Jane Active Member

    323
    Sep 10, 2010
    Occoquan, VA
    2008 55 Sundancer
    Man 900's
    If I get enough interest, at some point, I'll start making them again. But you guys wouldn't believe the number of e-mails I received telling me that they weren't worth what I was charging. But I never got that type of e-mail from someone who purchased them. That's for sure.
     
  17. Njlarry

    Njlarry Active Member

    216
    May 9, 2021
    Chesapeake bay
    2000 400 DB
    Cat 3126
    Maybe a group purchase?
    How does the long square rod attach to the chocks, it looks like they would be drilled and tap for threads? Mine are solid.
     
  18. Morgan Jane

    Morgan Jane Active Member

    323
    Sep 10, 2010
    Occoquan, VA
    2008 55 Sundancer
    Man 900's
    Yes, what I sell you is the lower sqaure adjustable length connecting backbone along with two new T-bars that are tapped. the T-bars will also have locking Mechanisms at each end.
     
    Njlarry likes this.
  19. Blown284

    Blown284 Active Member

    842
    Jan 12, 2014
    Chesapeake Bay
    2004 SeaRay Sundancer 460
    Cummings 480CE
    I bought these (kept my stock slides) but I love these. They make it very easy to get on and off. Well worth the $$$.
     

Share This Page

Show Sidebar