Windlass install?

Discussion in 'Electrical Stuff' started by boatman37, Aug 9, 2018.

  1. boatman37

    boatman37 Well-Known Member

    Jun 6, 2015
    2006 Crownline 250CR. 5.7 Merc BIII
    Previous: 1986 Sea Ray 250 Sundancer. 260 Merc Alpha 1 Gen 1
    5.7 Merc BIII
    In the process of buying a 2006 Crownline that does not have a windlass but could have been ordered with it. There is a Lewmar breaker near the battery switch on the starboard side just behind the captains seat. Would the wiring be ran at least to the breaker? I didn't see any wiring in the anchor locker. When installing the windlass I would just run the wire from that breaker up to the locker? Not sure if I want to tackle this install myself or pay the shop? My biggest concern would be running the wire through the cabin.
  2. KevinC

    KevinC Well-Known Member

    Feb 25, 2011
    Long Island, NY
    2004 340 Sundancer
    1988 Proline Center Console - 90hp Mariner/Mercury
    1969 Boston Whaler
    Twin 8.1 V-drives

Share This Page

Show Sidebar