Wire chase from helm to salon

[Roch Speiser]

Looking for info or pictures of wire chase from behind helm to old TV/am-fm radio location in salon on a 95' 370 sundancer. I need to extend speaker wires from salon location to helm to relocate fusion radio head to helm dash. Any info or pictures especially would be great for me to plan ahead before going to marina this weekend. I am sure there is a common wire chase in this boat

Thank You!

 

[jgoedd99]

Check out post 1470 and a couple follow up posts in the 370 Sundancer thread. You will see how others have done it. If you haven't checked out the dedicated 370 thread, you should. There is a wealth of information from other 370 owners.

 

[Roch Speiser]

No idea how to search for 1470.

 

[370Dancer]

Go to the 370 Specific threads. The chase starts at the side of the helm, goes through a big blob of sealant heading down in the coaming locker behind the big plastic insert you can't remove without removing the helm seat assembly by your helm seat, down and over the mid cabin cabinet (remove the ceiling there to see it) along the Starboard hull to the TV cavity. Need a stiff snake to forge that 10-15 feet. jokes aside.
I have at least 3 pull lines in there now for future Cat 5 to the helm and other goodies.
it is not a straight yank, be slow and try to have 2 people fish.
REPLACE the sealant when done, or your salon will be overcome with engine room fumes. A/C pressures. low flows to high. You will see.

 

[techmitch]

No idea how to search for 1470.

It wasn't easy, but here ya go Official 370 Sundancer thread

 

[Roch Speiser]

It wasn't easy, but here ya go Official 370 Sundancer thread

Thank you. And yes it is sometimes very difficult to find things in this forum.

 

[techmitch]

Thank you. And yes it is sometimes very difficult to find things in this forum.

Now you have the thread, click on page 1 and save it!