wire routing for clarion remote

Henry Boyd

Well-Known Member
Apr 24, 2007
6,014
Newburyport, on the peaceful and serene Merrimack
Boat Info
‘09 Sabre 38 Hardtop Express “Serenity”
Engines
Volvo D6 w/IPS450 Pods
Does anyone know how the Factory Installed Clarion stereo remote cable is routed on the 280 from the main electrical panel to helm?

Lacking that answer, can anyone suggest a way to route a cable for a replacement stereo remote?

Thanks

Henry
 
I was just out there in my 280 running a wire for the radio antenna and my inverter remote panel. If you reach up through main panel following the wiring bundle that heads aft you might be able like I did fish a wire through the hole the bundle goes through that is very tight. In the head on mine is a small cabinet over the sink and if you look up near the back top you will find a zipper that gives you access to the wire run. You also need to pull the two panels in the head that are closest to the helm and then you can get to the bundle again and feed it into the dash area to replace the remote. You might be able to wire into the old remote cable if you do not want to go to all this trouble. You definitely need a helper. Good luck.
 

Forum statistics

Threads
112,950
Messages
1,422,865
Members
60,932
Latest member
juliediane
Back
Top