Thread: Fuel Gauge for Sea Ray
04-21-2009, 02:32 PM #1
Fuel Gauge for Sea Ray
Sea Ray Fuel Gauge 2 for 280 Sundancer & 290BR
Sea Ray Fuel Gauge 2(Sea Ray part# 1540665). Brand new gauge, never installed in boat. This gauge will fit the following models; 2001-2004 290BR, 2001-2004 280 Sundancers, 2003-2004 300 Sundancers. No scratches on the face and in perfect condition. Gauge will be bubble wrapped and carefully packaged for shipping.
Not for SmartCraft Systems. This is why I am selling. Our boat has the SmartCraft system and needed to get correct replacement.
$80.00 plus shipping
Last edited by secret agent; 05-17-2009 at 07:49 PM.
04-24-2009, 02:13 PM #2
Re: Fuel Gauge for Sea RayBeach Runner
Alpha's No Gen
Flagler Beach, Florida
04-24-2009, 08:12 PM #3
04-25-2009, 08:07 PM #4
- Join Date
- Apr 2009
- Grand Haven, MI
- 2000 380 Sundancer
- 7.4 horzions
Re: Fuel Gauge for Sea Ray
your problem is most likely the float on the sending unit located inside the fuel tank. I have no experience with your model however I had a the same problem on my 380 DA. There should be a access hole located on top of your tank and you will find a wire attached to the top of the sending unit. remove the wire and back out the screws. Hopefully you have enough room to remove the sending unit and free it up and check it for proper operation. I'ts also possible the sending unit is bad. I would suggest checking your wire connections as well.
04-26-2009, 10:24 AM #5
By Sorrento 25 in forum General Maintenance/Repair QuestionsReplies: 4Last Post: 11-01-2012, 11:54 AM
By 270mike in forum Classic Sea RaysReplies: 1Last Post: 08-24-2009, 10:43 PM
By Ship Tzu in forum Electrical StuffReplies: 13Last Post: 08-17-2009, 05:34 PM
By Millerman in forum Modifications/CustomizationsReplies: 2Last Post: 08-30-2007, 07:23 PM
By mikestein in forum Sport BoatsReplies: 0Last Post: 07-16-2007, 08:14 AM