26 inch LED TV install

[Time To Relax]

Great thread really appreciate it! Question on a 2005 340da how is the cover ( muff ) around the factory installed TV attach ?

[justlookin]

I spoke with a Sea Ray customer rep, the part is in house manufactured part that is discontinued. I am still searching for a resolution, please let me know if you find one. Thanks

[sfl larry]

Vince,

The 110 VAC outlets are not mounted in the bilge; it is in the locker directly under the helm where the DC fuse blocks are located. For me this was a completely new install as I did not have a TV mounted at that location from the factory, I had to run the wires myself. I needed to get the TV antenna wire from the amplifier over to the TV and since I was pulling wires, I used the existing DVD played and pulled audio/video signals as well. Now all three TV can watch different stations or DVD movies if I wish.

The photo I am showing there is directly under my helm behind the hatch, not in the bilge. Good lord, I am not running 110 VAC in the bilge.

I have already looked into a vinyl material to match the existing vinyl in the cabin. The future plans are to build a frame around the TV and use matching vinyl to cover it. For now it looks good without the frame, but I think it would look better with it, plus add extra support.

how does the "muff" (as you call it ) around the tv come out I am getting ready to do the same thing on my boat