Results 1 to 5 of 5
Thread: Fuel treating an MPI engine
-
09-22-2012, 10:44 PM #1
- Join Date
- Jul 2012
- Location
- northwest
- Boat
- sea ray
- Details
- 210 select
- Engine(s)
- 350 mag
- Posts
- 5
Fuel treating an MPI engine
Does anyone have a way to treat an MPI engine for the home mechanic for winterizing.
-
09-23-2012, 07:39 AM #2
- Join Date
- Oct 2006
- Location
- S.W. Ohio
- Boat
- Silverton
- Details
- 330 Sport Bridge
- Engine(s)
- 5.7 MPI 350 Merc Bluewaters
- Posts
- 4,456
Re: Fuel treating an MPI engine
I have heard tale of adding fuel treatment to the fuel water separator (fuel filter). I have also heard pros and cons regarding gumming up injectors.
I would like to hear opinions also.Silverton 330 Sport Bridge, Kohler 7.3KW gennie, 8'6" Zodiac 3.5merc
Previous:
1992 Sea Ray 290DA
1990 Sea Ray 220DA
1989 Sea Ray 200 Bow Rider
http://www.reverbnation.com/adamsproject

-
09-23-2012, 10:04 AM #3
Re: Fuel treating an MPI engine
I fill half the fuel filter with 2 stroke oil, and run the engine while winterizing the rare water side of the engine.
I then replace the fuel filter. I've done it that way since I bought the boat. I haven't had any issues.
For cool fuel engines Merc recommends using a portable gas tank with the same mixture. They do not recommend spraying fogging oil into the throttle body.
-
09-23-2012, 10:07 AM #4
Re: Fuel treating an MPI engine
I rig up portable fuel tanks per the Merc manual and run the special cocktail through the engines. Somewhere in the site is a better description and pictures of my setup. I don't have time right now to find it, but if you do a search, it may show up under fogging MPI engines.
Scott of the most excellent Sea Ray "Destiny".
"I used to be indecisive, but now I'm not so sure........"

-
09-23-2012, 01:22 PM #5
Re: Fuel treating an MPI engine
I do also 2-cyle oil in mine (changed) fuel filter. Then when motor is gettinge smoking, shutdown the engine.
+quicksilver fuelstore


Reply With Quote



Hi thanks for your reply. Mine has the same supports and flatstock as well. Someone put 3/8" wood spacers at the two inside mounts between the transom and the platform.I tried to unbolt the inside...
Swim Platform on 390