Partner Sites:  www.BOEmarine.com | www.CBangler.com | www.BandofBoaters.com

Results 1 to 3 of 3

Thread: Contact Us

  1. #1
    Join Date
    Oct 2007
    Location
    Washington Park Marina, Michigan City
    Boat
    Sea Ray
    Details
    '07 340 DA, E97, A75, VV4, Soft Top '12 Boston Whaler 15 Montauk
    Engine(s)
    8.1 Mercruiser V-Drives, Mercury 60 HP Bigfoot
    Posts
    13,154

    Contact Us

    Due to a glitch, the "contact us" link was not sending notifications. It has been fixed, so if anyone out there is still having issues, please try again with the link.

    We apologize for the frustration I am sure some of you have experienced. Thank you for your patience and understanding.

    Scott
    Scott of the most excellent Sea Ray "Destiny".
    "You listen. On this ship, you're to refer to me as 'idiot', not 'you captain'. I mean, you know what I mean.




    Quando omni flunkus moritati (When all else fails, play dead)
    Previous boats: '03 320 DA, '01 280 DA, '95 270 DA, '81 260 DA, '87 230 WE, '66 Boston whaler 13 sport, '75 BW 13 Sport, '87 BW 15 Supersport, '09 BW 15 Supersport and a couple of dinghies.

  2. #2
    Join Date
    May 2015
    Location
    Highlands, NJ
    Boat
    Sea Ray
    Details
    Sea Ray 300 1987 Cruiser, Raymarine Radar, GPS and Depth Finder. Microwave, AC/DC Refrigerator, Vacu
    Engine(s)
    Twin 260 Mercruiser, V Drive
    Posts
    8

    Re: Contact Us

    I have a 1987 Sea Ray 300 Cruiser. I need to get replace the float switch and clean the pump. I am looking for advise on how to get access to two bilge pumps in the center and stern. Both are below the engines and inaccessible from the deck. I am told that the only way is to lie on the engines and stick you head. Does anyone have any further advise?

    I used by 10 year old Nephew but even he could not get any way near the pump and float switch.

    Any advice would be gratefully received.

  3. #3
    Join Date
    May 2011
    Location
    potomac river
    Boat
    sea ray 205 sport
    Details
    2010 sea ray 205 sport F150 5.4 xlt 4x4
    Engine(s)
    Mercruiser 4.3 mpi alpha 1.62
    Posts
    1,932

    Re: Contact Us

    Quote Originally Posted by ChrisJA View Post
    I have a 1987 Sea Ray 300 Cruiser. I need to get replace the float switch and clean the pump. I am looking for advise on how to get access to two bilge pumps in the center and stern. Both are below the engines and inaccessible from the deck. I am told that the only way is to lie on the engines and stick you head. Does anyone have any further advise?

    I used by 10 year old Nephew but even he could not get any way near the pump and float switch.

    Any advice would be gratefully received.
    You might consider posting this in the sport cruisers forum for a better response.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •