Partner Sites:  www.BOEmarine.com | www.CBangler.com | www.BandofBoaters.com

Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Hybrid View

  1. #1
    Join Date
    Mar 2004
    Location
    Kent Island - MD
    Boat
    Seacraft
    Details
    23 Center Console, Raymarine C140W, Raymarine S1000 Pilot, Standard GX2100 VHF w/AIS, Airmar GH2183
    Engine(s)
    250 Yamaha HPDI
    Posts
    2,441

    Welcome new CSR Advertiser - DryBoat

    DryBoat is onboard with sponsoring CSR. Please take a look at what they do. Dryboat is a Revolutionary process to restore coring in wet stringers, hull sides, bottoms, etc. Here is a link to their site - http://www.dryboat.com/index.htm
    Attached Images Attached Images


    Jim Maier | BOEmarine.com | 866.735.5926 x104


    Get 2% Back on every order with our Captain Rewards Program!


    Please do not send me emails through CSR or PM's. I get too many inquiries to be able to manage them that way.
    Please email me jim@boemarine.com

  2. #2
    Join Date
    Dec 2015
    Location
    Michigan Center, MI, Penobscot, ME & Catawba Island, OH
    Boat
    Trojan International
    Details
    12 Meter Trojan International Motor Yacht Dinghy: Avon R3.11
    Engine(s)
    454 Crusaders
    Posts
    571

    Thumbs up Welcome new CSR Advertiser - DryBoat

    Terrific!

    Welcome, DryBoat!
    Hard work pays off in the future. Laziness, pays off now.

  3. #3
    Join Date
    Dec 2016
    Location
    usa
    Boat
    Between Boats
    Details
    Boatless
    Engine(s)
    Boatless
    Posts
    5

    Re: Welcome new CSR Advertiser - DryBoat

    Thank you!

  4. #4
    Join Date
    Jan 2011
    Location
    Cleveland, OH
    Boat
    Sea Ray
    Details
    1989 340 Sundancer Raymarine E90W Radar/Chartplotter
    Engine(s)
    Twin 454 Mercruiser 340's
    Posts
    930

    Re: Welcome new CSR Advertiser - DryBoat

    Interesting process but

    "non-evasive"?
    Laurie and Mike and 'The Boat to be Named Later'

    Proud Member of the Hole in the Water Club

  5. #5
    Join Date
    Dec 2016
    Location
    usa
    Boat
    Between Boats
    Details
    Boatless
    Engine(s)
    Boatless
    Posts
    5

    Re: Welcome new CSR Advertiser - DryBoat

    Sometimes non-evasive by going from the back side not thru gelcoat. Or the least invasive compared to cut and replace and we retain the original structure and form.

  6. #6
    Join Date
    Mar 2011
    Location
    Racine, WI - Lake Michigan
    Boat
    Sea Ray
    Details
    370 DA 1999, 12' Duras
    Engine(s)
    7.4 MPI Horizon Merc w/ V-Drives, 9 hp OB for dinghy
    Posts
    603

    Re: Welcome new CSR Advertiser - DryBoat

    Welcome aboard and thank you for supporting the CSR

    1999 370 DA
    Proud member of the Hole in the Water Club

    Previously owned '91 310 DA, '94 2855 Ciera, '86 210CC

  7. #7
    Join Date
    Apr 2008
    Location
    Delaware
    Boat
    Sea Ray
    Details
    1989 300 DA
    Engine(s)
    Twin 5.7 Merc Alpha I
    Posts
    2,216

    Re: Welcome new CSR Advertiser - DryBoat

    Looks interesting, but it seems to me that you have to find the moisture before any rot or damage occurs, otherwise all you have left is dry, rotted wood/core. You'd also need to figure out how the area got wet to begin with in order to prevent it from happening as soon as the boat went back in service.
    1989 Sea Ray 300 Sundancer "Summer Quarters"
    Twin 5.7L carbed Mercruisers w/Alpha 1 Gen1
    Delaware Bay

  8. #8
    Join Date
    Dec 2016
    Location
    usa
    Boat
    Between Boats
    Details
    Boatless
    Engine(s)
    Boatless
    Posts
    5

    Re: Welcome new CSR Advertiser - DryBoat

    Yes It is best to find the moisture before it get out of hand. Thats why we offer a free to use moisture meter on our website. but the great thing about our process is we can dry the area so it will except epoxy, good wood or not!
    and yes we find the intrusion points and seal them up. Normally we can find those areas by moisture mapping and using infrared cameras.

  9. #9
    Join Date
    Dec 2007
    Location
    Homeport: Charles City, VA
    Boat
    Sea Ray
    Details
    1999/2007 330 Sundancer Hardtop.
    Engine(s)
    6.2 Merc Horixons 1.5:1 Velvet Drives
    Posts
    4,188

    Re: Welcome new CSR Advertiser - DryBoat

    I've seen the process advertised for some time. I like it, but am confused. OK. Two things escape me. If I'm wicking water out, where is the air coming from to occupy the space the water is vacating and how do they seal that after the procedure is completed? I'm concerned as to the "what's next" part of the equation. . I would like an explanation as to what they do after water exatraction. There is still mush in the cavity. How do tou solidify the mush?

    I like the concept. The devil is in the details.
    Best Regards,
    David

    "Saint Max", '99 330 Dancer
    2007 6.2L Mercruiser Horizons; 1.5:1 Velvet V5000 "V" Drives

  10. #10
    Join Date
    Dec 2016
    Location
    usa
    Boat
    Between Boats
    Details
    Boatless
    Engine(s)
    Boatless
    Posts
    5

    Re: Welcome new CSR Advertiser - DryBoat

    Our system works very well in many applications. First and foremost our system is best if water intrusion is found before rot has started as we would dry the coring & preventing rot and delam from happening.Then we would find the intrusion and seal or repair it. We also can dry compromised wood coring. We first dry area or area's to stop the rot and dry it to single digits in most cases, then we use a injection process using epoxy or penetrating epoxy and sometimes a flexible epoxy depending on the area. In some cases let's say for a example we have a whole hull side wet and 90% is just wet and the other 10% is gone (rotted away) we could dry the 90 precent and boatyard can repair the other 10% of it. Over the last 12 years drying boats I have found balsa core will not start to rot if wet and air does not get to it. So thats why a lot of times you find the area where the water came in at like a thru hull, that area around it will have rot or start to because of air getting to it, but go 6 inches in core and the wood will be good.
    the Dryboat system work great I have had 100% success so far. I hope this answered your questions if not please feel free to call me anytime.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •