One of the hooks looks like it is a little bent out. Take it off and bend it back to match the other one that is closed a bit more and then reinstall it. I just noticed that.
Looks like you might want to try scaping the marine growth off of the locking cylinder rod with a piece of Aluminum or Brass so the rod retracts back inside all the way putting the locking hook in the correct position. If that does not work then I would recommend that you send them in for...
If you don't find what your looking for or your still in a bind let me know. Best number to get me is my Cell. Send me a test because I don't answer no name calls. Cell (727) 729-1256 Frank
The Rocker switch remotely operates a Battery Disconnect Relay. It is the Relay on the hydraulic unit that you connect you (+) cable to from your House Batteries. The relay mechanically latches with a momentary electrical pulse. The switch changes the Polarity of the pulse that goes to the...
You may want to opt for a new Swim Platform. They double as a swimming platform and they also have some nice adjustable cradles to hold your Dingy or Wave Runner. Davits tend to want to swing around and bang into things if you are not careful. The best I have seen is the one by SeaLift...
Will do. Thanks. BTW, did you want to replace the outside hoses that are in the water. There are 6 hose assemblies. I have the lengths. All is in stock.
Hi Frank here late. I wanted to kind of set your mind at ease. The install of the new system is form fit and function. Very easy install. Just make sure that you tell Damon to keep track of which hose goes where. It just makes it a lot easier. Also all of the wiring is multiconductor boat...
Can you Damon give me a call. I have another test that can be run but, I must talk Damon through it before he tries it. I would like to have 3 people doing it. One outside with a walkie talkie and two inside to control one valve each. Please have him contact me. Thanks. (727) 781-1924...
NICE reference picture of the Solenoid Valve Manual overrides! They can come in real handy when having a problem and also with trouble shooting. Just a word of EXTREME caution. The 5/8" hex nut that holds the coil onto the valve that goes around the RED knurled knobs, Never Never EVER EVER...
Did you guys run the test to determine if the house batteries are up to the job? That will tell us a lot. Please let me know. Thanks, Hydraulicpro, Frank
I would not recommend having the cylinders rebuilt by a local hydraulic repair shop. These cylinders use special seals and will not work well with just any type of seal. The cylinders themselves are very difficult to take apart without damaging them. We have rebuilt many of these cylinders after...