CW Duke
New Member
My boat was hit by lightning the Monitor Panel no longer indicates alarms; can someone help me locate a replacement unit?
1989 460EC systems monitor panel alarms
- Thread starter CW Duke
- Start date
Skybolt
Well-Known Member
- Nov 11, 2014
- 6,429
- Boat Info
- Reel Nauti
460 EC
- Engines
- Detroit 6v92TA
(Low profile's)
Alison Gears
Westerbeke
12.5kw Genset
http://clubsearay.com/index.php?threads/working-led-sys-monitor.103102/
This came off of my boat and 88' 460EC. If your interface is just terminal strips this is it.
CW Duke
New Member
The PCB is what I am trying to find now. Can you tell me more about going Digital? the alarms on CW go to terminal strips then to the PCB then to the led display via the ribbon cable, I have replaced several components on the PCB, but with no schematic my ability to trouble shoot is limited to visual. Going digital is my answer, I think?
techmitch
Well-Known Member
- May 1, 2008
- 8,327
- Boat Info
- 1999 270 DA
- Engines
- Twin 4.3s W/Alpa I Gen II's
I know this isn't the wiring diagrams https://s3.amazonaws.com/srweb-pvt-...ts-manuals/1989__1989-460-EXPRESS-CRUISER.pdf
But what years did they make the 460 EC?
Skybolt
Well-Known Member
- Nov 11, 2014
- 6,429
- Boat Info
- Reel Nauti
460 EC
- Engines
- Detroit 6v92TA
(Low profile's)
Alison Gears
Westerbeke
12.5kw Genset
So the terminal strips feed the LED PCB and that's it. If you have something different it was adapted from another years system monitor.
Here is some light reading for the digital conversion if your so inclined. http://clubsearay.com/index.php?threads/actisense-emu-1-engine-converter-analog-to-digital.101609/ If your interested in this please post in that thread.
There is another thread about converting the system monitor to digital as well. @ttmott has a great write up on that here http://clubsearay.com/index.php?thr...nd-improve-the-sea-ray-systems-monitor.91270/
Skybolt
Well-Known Member
- Nov 11, 2014
- 6,429
- Boat Info
- Reel Nauti
460 EC
- Engines
- Detroit 6v92TA
(Low profile's)
Alison Gears
Westerbeke
12.5kw Genset
I believe they were only made for three years (87-89) before they switched over to the 460 DA which is a completely different boat. There is limited information on this boat because Brunswick bought Sea Ray around that time in 86.
I don't think there are any wiring diagrams for the EC. I have just about everything in print on this boat and have not seen or found any wiring diagrams that mean anything. Only some general diagrams that depict general wiring.
Last edited:
CW Duke
New Member
Thanks for the Sea Ray Palm coast parts list, the one we had was incomplete "CW" was built at the Palm coast plant in 89.
