Search results

Long story short. I wanted to get my boat in my driveway to deal with water in the tank. Dispatch wanted to know if it was storm related which I said yes. Big mistake, Oh we don't cover that and it will be a pay tow, someone will be in touch with a price in 48 to 72 hours. OK, so I say what if...

Working on an electrical gremlin. Engine doesn't use the old style starter slave it has the newer setup series of 4 relays. More difficult to test. Getting power from the ign. switch to the relay in question which has 4 wires. R/P 12v. Y/R trigger wire. 2 remaining wires are Y/B and Bl/ B...

So I just bought this boat a couple days ago and my Rinda scanner won't be here until Wednesday. So the problem is it won't start hot or cold unless fuel is sprayed into it. Once it catches it idles perfectly for as long as I let it, throttle up and down nice. Figured it was a bad boost pump but...

looking for someone in the area with time for a visual on a 23' bowrider. Of course I will compensate you. Thanks Mike M.

◀ prev ▲ next ▶ x prohibited[?] Posted a day ago print favorite this post 1997 searay 270 sundancer parts - $123456 (Plymouth) hide this posting < image 2 of 3 > J 339-987-9236. Saw this today. No affiliation © craigslist - Map data © OpenStreetMap (google map) Call or...

2000 & up. Replaces brass pump. $250.+ shipping

Meticulously maintained , 6 years a fresh water boat, currently located on Cape Cod Ma. Sale includes 2006 Wesco triple axle, aluminum, torsion axle trailer. disk brakes Closed cooled twin 5.0's with 680 hours, new pump impellors and elbows this year, fresh AF. B3 drives with showers...

Someone sent me a PM that I was unable to respond to. 3 years and 300 hours later, everything is working fine. Original pumps, FPR, and module. Basically. bead blasted the flakey cover. sealed the water jacket side with POR 15 and tapped module and installed screw in water nipples

Couple years back someone posted up a link for just the rheostat, bought 1 and it worked well. Have lost the info on it since. Any help would be appreciated

Someone asked about this, and I wanted to respond with my fix for this poorly designed POS. Had a 9 year old cf3 that failed/ It had a breach between the gas and water section of the casting. Also had the paint flake issue altering my fuel pressure. And a leak at the water inlet with the old...

check out THT

Thinking this could be my transom leak problem. Only leaks from port transom underway. Seeing both of the B3's have a pickup tube anyone know where these tubes come together. Are they both functional, I would think 1 would be plenty.

Little green light on dash is off,but the ER system gauge says it's full. Any ideas how to trouble shoot this?

So... my steering arm pins decide to start leaking in the middle of July. Ordered up all the stuff I need from JR marine. He's telling me I should tear into it ASAP or risk trashing my transom assemblys. Any truth to this? really wanted to wait till the end of the season.

No backlighting at all, every thing else works fine. Anyone? thanks

Thanks

Got this issue at my slip.Hard to understand what's going on here,figure you either have correct polarity or you don't. This one goes back and forth, triggering and shutting down my panel. I'm not too concerned about the shock hazard and would like to overide the shutdown. Is there a way to do this?

Had this issue on my last boat as well, and not sure if it's the water in my area or the salt spray. My winsheid which looked brand new, now has water spotting that is not coming off with conventional methods. Any one else have this problem and resolved it?

Just noticed I have a considerable bend on the shaft on my stock anchor. It seems to be poorly designed with no lateral bracing on the shaft itself, even though the metal is quite thick. Can anyone suggest a better style, that will fit my 280?

Anyone ever had a factory transducer leak? All sign points to it.