Search results

We have a 2000 Sundancer 340. The generator ID tag is worn and we can only see info on the bottom two lines. No ser num., date of mfg. or Family Name. The Sundancer parts manual tells us we have a Westerbeke 4.5 kw 120/60 gas generator. Anyone know which model it could be? BCG, BCGB, BCGTC...

Question - Does it make sense to rotate batteries to prolong their life? I've heard to replace all at once every 2-3 years. Wondering if rotating will help. 2000 340 Sundancer. 2 Starboard for engine and generator, 2 Port for engine and house. I have to think the house (or the entire port...

2000 Sundancer 340 - Fresh water fitting on the pressure side of my Shurflo 2.8 GPM pump is starting to leak. Pump is cycling every 15-20 minutes from slow drip. 90 degree elbow with brass fitting to pump and a "quick connect" fitting to original blue water pipe. Anyone have any ideas as to...

2000 340 7.4 V drives, closed cooling system. Problem One - My starboard engine is running hot at higher RPMs, cools fine when reduced RPM and idle. Problem two - The inside exhaust manifold on my port engine is temping 155 degrees while all 3 others are around 120 degrees. Steam coming out...

2000 340 7.4L V drives - 4 Battery set up (I assume stock). Twice now our power at the dock has gone off and the refrigerators ran the house batteries down, way down, 0 on the Voltmeter. No start on Port engine. Restored power and generator on the hook recharged and they seemed to operate...

2000 340 7.4 V drives. Not much room to get around back there. Any tricks to make the job go smoother, less busted knuckles and bruised body parts? Have complete kits as well as thermostats (closed cooling). All suggestions appreciated!

I am considering mounting a flange for the old Magma Round Grill to the gunnel of my 2000 SeaRay 340. Forward of the gas filler, but short of the side step. Right on the back starboard corner. It looks very much like a flagpole mount but with a 3/8-1/2 inch hole to receive the mounting bar...

At start, my starboard engine starts and dies. After starting again, it revs a little higher and runs great. Does it every time. Port engine fires perfectly. Any suggestions?