Have a couple of sections of pinstripe on the top half of the boat that have a nick or two in them and it bothers me. Not looking to replace the whole thing but would like to get some replacement pinstripe and cut some small sections and simply overlay it over the few flaws that are there. It's...
I finally picked up one of those ProMariner battery chargers. 12-20 I think. Anyway, anyone have any tips, suggestions or what not on the installation? It's on my list of projects over this long winters nap. I have an 04 300DA.
Any help would be appreciated. Thanks
Ok everybody. Here's one for you. Was on the boat and someone left a soaking wet never washed dark blue towel hanging on side of boat. The towel was laying on the vinyl for an extended period of time and some of the color or dye bled out and somehow permeated the vinyl on the recently redone...
Hey everyone. What are you all doing about keeping your sea strainers as well as the lines they feed clean and growth free? I met this guy at a fall fair in our town last October and he said he crushes up a chlorine tablet and puts some in both the AC strainer as well as the generator strainer...
When we bought our new to us 300DA this past September one of the things that we noticed was a maybe 18-24” by an inch or two wide section all the way in the front of the boat that was worn due to previous owner occasionally beaching the boat in what was a very sandy area he boated in NJ. This...
Weather has been relatively mild so far here and want to spend some time down on the boat cleaning to save myself time when the Shrinkwrap comes off for other things. What is everyone using to clean/polish the cabinets in our Dancers??
On our new to us 2004 300DA. 5.0’s with B3’s. I immediately noticed when we looked at the boat the first time that the position of both throttles when in neutral seem to be a little further back than I would’ve imagined them to be. I think I’ve read some other people commenting on this as well...
2004 Sundancer 300. The small accent lights along the floor in the cabin. Looks like a g4 pin, but it’s not. It’s shorter and fatter. Anybody change this and remember what they used?
I’ve posted a few times here already but have not formally introduced myself. This fall we purchased a 2004 Sundancer 300. We had previously owned a 1995 Penn Yan Outrage 225 with a 5.7 Mercruiser I/O and an Alpha 1 drive. We had bought that boat from my Dad who was the original owner. Never...
The rubber bushing that stops the transom door. It is rock hard, and cracked, and is not giving much cushion to the door. The way my wife and daughter will undoubtedly swing it open, it will need all the cushion it could get.
Any ideas?
Been replacing all of the bulbs on our new to us 2004 300DA. Every bulb is just about switched over but I forgot about the one in the bathroom. So as I don’t have to go back to the boat and pull the bulb, would anyone know what bulb size that would be? I think I read somewhere that the bilge...