1st haul out

Lenny3

Active Member
Mar 19, 2021
131
Selinsgrove Pa.
Boat Info
2007 Sea Ray 310 Sundancer
2006 Sea Ray 220 Sundeck (Previous)
Engines
Twin 5.7 350 MPI
5.0 Mercruiser Bravo III
2F150D0F-6962-4372-B9AE-815CD25DD946.jpeg
5B9E2EDF-149B-4531-A3BF-58EAD6B02230.jpeg
AAED50E8-5AE6-452A-A1C2-F6736F84C91F.jpeg
7ED93A27-D373-4FB7-83D6-0B4FECCCA4D4.jpeg
1st haul out and was expecting a bottom paint job but it looked great.

Compound buff and wax below the rub rail, install new speedo paddle wheel
 
@Strecker25, what kind of dripper guard? I’ve got that staining……. Thanks a bunch!
 
Dripper Guards seem to work well as long as they are not close to waterline. Tried them on my AC discharges, close to waterline, and lost them one by one. They actually sent me a few replacements but they came off as well. Went back with small tubing sections siliconed in and haven't had a problem since.
Dripper.jpg Dripper1.jpg
 
Get 'em at Lowes or Home Depot, about $2.50/foot and cut 'em to fit. The ones in the bottom pic were in the boat about 5 years when that pic was taken.

DSCN1370.jpg


DSCN1372.jpg
 
Dripper Guards seem to work well as long as they are not close to waterline. Tried them on my AC discharges, close to waterline, and lost them one by one. They actually sent me a few replacements but they came off as well. Went back with small tubing sections siliconed in and haven't had a problem since.
View attachment 139551 View attachment 139552

Those don't look bad. The black with the stainless.
 
I have them on my 38 as well. I find that if I tie up at the gas dock on the port side, I will be missing the dripper guards. I always try to remember to tie off on the starboard side each time.
 

Forum statistics

Threads
112,950
Messages
1,422,833
Members
60,931
Latest member
Ebrown69
Back
Top