2008 240 Sundeck measurements for trailer

[63A]

I need to buy a trailer for my 2008 Sundeck 240 which is currently on a lift in a slip. It's not very accessible at the moment so I'm hoping somebody has the measurements already or has the same boat on a trailer where it can be measured. The trailer builder asked for the following:
1. Distance from drain plug to 1st, 2nd, 3rd chine (looking at stern)
2. Distance from drain plug to side of hull (looking at stern)
3. Tip of bow to drain plug/transom
4. Bow eye to drain plug/transom
5. Bow eye to bottom of keel (vertical)
6. Top of bow to bottom of keel (vertical)
7. Distance from tip of bow to bow eye (horizontal)

Any help would be appreciated.

 

[Lazy Daze]

I realize you may not be near your boat right now, but I would highly suggest you do this yourself. This is not a knock on anyone here on this forum, but if someone was wrong - you're left holding the bill for a re-do from the trailer manufacturer. In other words, how do you KNOW that the person responding is correct? You're much better off waiting a bit till you can get to the boat to measure for yourself. Then you know it's right.

 

[randmhall]

I need to buy a trailer for my 2008 Sundeck 240 which is currently on a lift in a slip....

Have you considered an aluminum trailer. They are built to be adjustable, with the added benefit of being lighter weight and rust free. Look at loadmastertrailer.com or ezloader.com