48 DA Owners Club

[Hell Froze Over]

Grant,
Where did you find the wiper arm replacement and blades? I have one that is chipping and would like to replace them.

Thanks and great job on all of your work.

 

[AugieC]

Anyone know how to remove the shower mixing cover? Water is leaking into the bilge when turned on so connection might be loose. There are no screws visible but will not pop off.

 

[techmitch]

Grant,
Where did you find the wiper arm replacement and blades? I have one that is chipping and would like to replace them.

Thanks and great job on all of your work.

Welcome to CSR.

 

[formula dave]

Anyone know how to remove the shower mixing cover? Water is leaking into the bilge when turned on so connection might be loose. There are no screws visible but will not pop off.View attachment 143552

Rotate the cover by hand 45 degrees counterclockwise and it will pull out.

 

[ocgrant]

Grant,
Where did you find the wiper arm replacement and blades? I have one that is chipping and would like to replace them.

Thanks and great job on all of your work.

https://www.amequipment.com/

 

[Morgan Jane]

Anyone know how to remove the shower mixing cover? Water is leaking into the bilge when turned on so connection might be loose. There are no screws visible but will not pop off.View attachment 143552

Hoped that solved your problem. If not, you can get behind this area from the Salon. I think the access panel is behind the picture on the wall or something like that. Wish I had known you can rotate the mixing valve a quarter turn.

Bill

 

[ric992]

Hi, I have my 48 sundancer in bahamas and came back to Florida for a day or two. My strainer basket for engine is rotten out at the bottom. I was hoping to take one back with me. I have cummins qsc 8.3 540hp engine. Does anyone know the size or part number for this. I know I should have brought the old one back with me, but I had to rush back. Thank you

 

[ocgrant]

 

[Imperial]

Does anyone have the schematics or any files / info / parts on doing the sanitation hoses…. My time has come

 

[ocgrant]

Does anyone have the schematics or any files / info / parts on doing the sanitation hoses…. My time has come

PM me your email they are too large to post here

 

[rodrigoroa]

Hi guys, does anyone know if the hydraulic swim platform has any lubrication points?

 

[ahodek]

Vertifrigo owners...

How do you switch the doors to the left side on your DP2600IXD4-F-2. My manual sites a different model for some reason. Do you have to take the trim off to access the hardware?
Thank you.

Andy

 

[TNT8808]

Vertifrigo owners...

How do you switch the doors to the left side on your DP2600IXD4-F-2. My manual sites a different model for some reason. Do you have to take the trim off to access the hardware?
Thank you.

Andy

If i remember correctly, once I removed the center hinge the freezer door pulled down and the fridge door pulled up. The rest was self explanatory. Just swap the parts to the other side.

 

[Imperial]

Working on the sanitation hose project. I’m having hell of a time getting my new hose through the pvc pipes. Are there diff outter diameters of dif hose? I’m using trident 101-1126 which to my knowledge is direct replacement of the factory 104-1126 but the outter diameter seems bigger. Is it just a real bitch or did I get wrong hose?

 

[Shaps]

Working on the sanitation hose project. I’m having hell of a time getting my new hose through the pvc pipes. Are there diff outter diameters of dif hose? I’m using trident 101-1126 which to my knowledge is direct replacement of the factory 104-1126 but the outter diameter seems bigger. Is it just a real bitch or did I get wrong hose?

Did you pull the old ones all the way out?

I think the move was to attach new to old and pull through.

 

[Imperial]

Did you pull the old ones all the way out?

I think the move was to attach new to old and pull through.

I pulled the mid berth hose out and we’re trying the rope in middle of hose screwed to a block of wood inside the new hose and using that to pull the new hose in but I can’t even get it started. The new hose is visually a bigger OD but when I look up specs to what others have used it seems to be within a couple hundredths of the other hoses.

 

[TNT8808]

I pulled the mid berth hose out and we’re trying the rope in middle of hose screwed to a block of wood inside the new hose and using that to pull the new hose in but I can’t even get it started. The new hose is visually a bigger OD but when I look up specs to what others have used it seems to be within a couple hundredths of the other hoses.

This is the method I used, and it was still extremely difficult to pull through even with every type of lube/soap I could find.

 

[Shaps]

Does anyone know who manufactured our grey water sump box?

 

[Imperial]

This is the method I used, and it was still extremely difficult to pull through even with every type of lube/soap I could find.
View attachment 144869

What brand and model hose did you use?

 

[TNT8808]

What brand and model hose did you use?

Dometic/Sealand 1-1/2" OdorSafe Hose P/N 306342871