Bravo 3 prop cleaning?

Discussion in 'Gas Engines/Drives/Transmissions/Props' started by Tri County Trail, Nov 5, 2022.

  1. Tri County Trail

    Tri County Trail Member

    43
    Aug 29, 2021
    2005 Rinker 360
    Mercruiser 8.1l Bravo 3s
    Bravo 3 prop cleaning?
    Is it ok to sand blast these or use a ultrasonic cleaner with elma tec clean s1?

    PXL_20221104_172640161.MP.jpg
     
  2. scoflaw

    scoflaw Well-Known Member

    Aug 10, 2011
    cape cod mass, cape coral fl
    1999 Powerquest legend 260 sx 502 mag
    2005 Baja 242 islander 496
    502 mpi Bravo 1
    496 mag B1
    try muriatic acid first
     
  3. 310sundancer

    310sundancer Active Member GOLD Sponsor

    141
    Feb 28, 2012
    Lake St Clair MI Mac Ray harbor
    2003 420DA
    6CTA
    6CTA
    Pull the props off, spray with Muretic acid, rinse with water.
     
  4. 310sundancer

    310sundancer Active Member GOLD Sponsor

    141
    Feb 28, 2012
    Lake St Clair MI Mac Ray harbor
    2003 420DA
    6CTA
    6CTA
  5. Jimmy Buoy

    Jimmy Buoy Well-Known Member

    Dec 3, 2008
    Sarnia, Ontario, Canada
    2004 Formula 27PC
    twin 4.3 EFI/Bravo III Dual Prop Drives
    Just did mine with muriatic acid and a foam brush - works well. Just make sure to rinse well with water afterwards and dry them.
     
  6. Tri County Trail

    Tri County Trail Member

    43
    Aug 29, 2021
    2005 Rinker 360
    Mercruiser 8.1l Bravo 3s
    A little ultra sonic Acid wash!

    PXL_20221112_043408650.MP.jpg PXL_20221112_053054726.MP.jpg PXL_20221112_053058126.MP.jpg
     
    Bill Curtis and Nater Potater like this.

Share This Page

Show Sidebar