Official 330 Express Cruiser / 340 Amberjack 1997-2003 Thread

sup guys, I've been running quicksilver 25/40 I'm currently around 800 hours I'm just curious is their any benefits of switching over to rotella 15/40?
 
mleone101 said:
sup guys, I've been running quicksilver 25/40 I'm currently around 800 hours I'm just curious is their any benefits of switching over to rotella 15/40?
Click to expand...

I’m around 1100 hours and still running 25/40. I’ve been considering the switch myself - a lot of guys at my marina run it.
 
Has anybody ever had to deal with the headliner detaching up near the bow? I am going to caulk and address everything on the top side I’m just wondering if anybody dealt with it before?
 
Mike007 said:
I just replace my canvas, everything forward of the Arch. I got all of the canvas from Great Lakes, Now im looking for the rear bimini or rear sunshade, does anyone know where I might find one Great Lakes says that the pattern was lost years ago.

Thank you
Click to expand...
They told me the same about the rear bimini I had one made I looked everywhere and couldnt find it
 
RGboatman said:
I have 1 outlet on the port side to the left of the storage locker,1 in the head,1in the galley. None of these work. All the starboard outlets work fine.
Click to expand...
There is a GFI in the bathroom under the mirror see if it tripped
 
The live well was not setup from the factory on my 33 EC. Can someone with one that was setup from the factory tell me where Sea Ray installed the thru-hull for it. A picture would be great. Thanks in advance!
 
Berettadog said:
The live well was not setup from the factory on my 33 EC. Can someone with one that was setup from the factory tell me where Sea Ray installed the thru-hull for it. A picture would be great. Thanks in advance!
Click to expand...

If your boat has a raw water wash down, the the sea cock for the live well would be position next to the wash down sea cock on the port side of the boat.

Both are located under the fish box in the the centerline area of boat. I can get you a picture in next week or so. I have to trouble shoot my raw water pump - the pressure switch is going bad.
 
Thanks for the response! My wash down pulls from the water tank unfortunately.
A picture of where the thru-hulls are located would be great.
 
Berettadog said:
Thanks for the response! My wash down pulls from the water tank unfortunately.
A picture of where the thru-hulls are located would be great.
Click to expand...

I’ll get some pictures. Seacock, pump, piping, etc. if not this weekend, I’ll grab them next weekend.

While at it you could install a raw water wash down too. My boat has both a fresh water spigot and a raw water spigot. We use the raw a lot.
 
acman said:
I had the same problem when I bought my boat.
It ended up being water leaking in from the Starboard porthole.
Replaced the gasket/screen and haven't had any water in there since
Click to expand...
You were dead on, that’s exactly what it was.Thanks!
 
Berettadog said:
Thanks for the response! My wash down pulls from the water tank unfortunately.
A picture of where the thru-hulls are located would be great.
Click to expand...

Here ya go. Not my rig these are from a 340AJ at my marina. The captain had the fish box out so I snapped some picts. (Mine is a “bit” cleaner down there).

616E531C-9AEB-474B-B408-EF3377AA9229.jpeg
616E531C-9AEB-474B-B408-EF3377AA9229.jpeg
5BF2E04C-73FD-4BF0-AEC3-62FCCEEF675F.jpeg
F9019190-94AC-4BC6-A6A4-F2A296EB6AB5.jpeg
BFE81446-E118-4B49-956A-7EF3E4848609.jpeg
 
Does anyone have experience in dismantling the cabin door and cowling to replace a Norcold DE-0041 fridge. The door opening is 2” shy from being able to remove my old fridge and replace with the new one.
The cowling has 4 screws on the bottom and one that I can see on top near the track. I can’t see where there anymore screws.
 

Attachments

  • 613869E8-B0D5-4A07-882D-B7EFBBEB1099.jpeg
    613869E8-B0D5-4A07-882D-B7EFBBEB1099.jpeg
    133.4 KB · Views: 97
It’s on my to-do list. It’s been there a long time because I’ve read it is a PIA.

If you do remove it, I’d very much recommend replacing the plastic door rollers and plastic tracks. They are prone to failure. Mine are shot - hence why it is on my list.

If you do remove, please post where all of the screw are located. I’ll probably be pulling mine this winter.
 
I’m looking for this vent cover that is located on the Starboard bow of the hull. I checked out FP Marine, but can’t seem to find it there. Anyone have an idea where I can find this?
 

Attachments

  • D81E0F56-2A14-4AD9-9301-0B4231E20290.jpeg
    D81E0F56-2A14-4AD9-9301-0B4231E20290.jpeg
    95.4 KB · Views: 104
Anyone know how to disassemble the adjustable drivers seat to access the bolsters? The zipper holding the vinyl cover on the bolster unzipped the entire length. I would like to take it off and have a shop fix it. The screw heads that I can access from under the seat just spin.
 
You must log in or register to reply here.

Forum statistics

Threads
113,163
Messages
1,427,601
Members
61,073
Latest member
kolak3
Back
Top