Window seals

M

Mick O'S

New Member
Sep 12, 2021
10
Boat Info
1998 37' Aft Cabin
Engines
454 Mercruisers
Does any know where I can source the window seals (outside ones) that run along the salon on a 37' Aft cabin please?
Thx!
 
Not sure what type of windows you have. I had a port window leaking You will need to find out which window you have and work from there

once I determined that, I came up with these for my 2000 380DA
https://www.mmimarine.com/mmi/index.php?pid=prod&item=view&prod_id=389778

Looking at them,
If they were long,
You could cut them down and glue to make the right size
 
Chris,
Thanks. I'll look at the web site and see where to go from there!
 
TAYLOR MADE HAS ALL SEALS THEY USE a sister company call them they will point you in right direction cant remember name of sister co.
 
Thanks. They could do a vastly better job of listing details on their page of seals. Hopefully they can find what we need.
 
GIVE THEM YEAR AND MODEL seals are pretty common on searay its the length that is different. I believe the sister company is liptek
 
Ok guys I know this has been beat to death but I need help bad. I received my seals for the side windows on my 1986 300 WE. The glazing seal looks about .06 to small on the width. Can any one verify or tell me how to get part numbers for the side windows like 9 foot long. So Taylor made and Searay cannot help me. If you look on Taylor made site they show all parts but no print or dimensions of rubber. So I am relying on someone that has part number.
Here is what I ordered
8334940 Glazing I think this is wrong number
3507040 Flocking looks correct
833890 Screw covers
Thanks Marty
 
duckhead69 said:
The glazing seal looks about .06 to small on the width.
8334940 Glazing I think this is wrong number
Click to expand...
That type seal is what I am looking for as well, but the profile of mine seems very different. My locking tab into the rail seems significantly smaller. I emailed them and will see what response I get.
Does your original seal match that over all shape, even if slightly different in the width?
 
I already got an answer from Taylor Made:

Unfortunately, with the year of your boat we will not be able to provide spare parts as we only go back 7 years, to keep up with our boat manufacturers and no longer do custom work. You will need to have this custom done. There is a place in Florida called Ocean Dynamics that does custom. You can contact them at 305.770.1800, https://oceandynamics.com/
 
John E3 said:
I already got an answer from Taylor Made:

Unfortunately, with the year of your boat we will not be able to provide spare parts as we only go back 7 years, to keep up with our boat manufacturers and no longer do custom work. You will need to have this custom done. There is a place in Florida called Ocean Dynamics that does custom. You can contact them at 305.770.1800, https://oceandynamics.com/
Click to expand...

You asked the wrong person. They have everything you need:

https://www.taylormadeproducts.com/hardware/wire-track-cover-vinyls/

Look through the side menu (not labeled as you would think) and find what your looking for. My boat is an 88 and I got everything I needed for the salon windows and windshield. If you email the link in that screen they will send you a drawing of the molding. Only ask for what looks right, if you ask for too many, you'll get nothing.
 
That email on the page is who provided the answer that I pasted above. Given the number of people that have referenced Taylor Made I was a little surprised by that answer.
I think my first mistake was going to "Side Window Parts". That's what I have/need. I will look thru all the Windshield Parts and hopefully find them there. Thanks
 
duckhead69 said:
Ok guys I know this has been beat to death but I need help bad. I received my seals for the side windows on my 1986 300 WE. The glazing seal looks about .06 to small on the width. Can any one verify or tell me how to get part numbers for the side windows like 9 foot long. So Taylor made and Searay cannot help me. If you look on Taylor made site they show all parts but no print or dimensions of rubber. So I am relying on someone that has part number.
Here is what I ordered
8334940 Glazing I think this is wrong number
3507040 Flocking looks correct
833890 Screw covers
Thanks Marty
Click to expand...

Call taylor made up, they sent me the dimensions sheets for two different ones plus they are sending me a free 1' sample of the one I think it is.
 
https://www.taylormadeproducts.com/hardware/sliding-side-window-parts/
these are the parts you need now they will direct you to sister company. They are the ones that will tell you how many feet for your model boat you will need. My boat is 86 they had all parts last year. Agreed with skybolt you got wrong Pearson if you need sliding window parts theses are numbers windshield are different seals look for mine or scorpion post all about this issue. Good luck
 
Go to above link Lipert in top right corner is place that will help you all with older boat seals. My seals were from them, three different ones I posted #above in this chat I think it was 30 feet of each seal for each window. Like 10 or 15 aside They are cheaper than taylormade also.
 
You must log in or register to reply here.

Forum statistics

Threads
113,120
Messages
1,426,612
Members
61,037
Latest member
wojozobl
Back
Top