jeffrey vargas
Active Member
- Feb 4, 2019
- 310
- Boat Info
- 2008 Sundancer 48
Previous
2004 Sundancer 390
2001 Sundancer 380
2000 Sundancer 34
- Engines
- Cummins QSC 8.3
What is Sea Ray tech assist? I have a Sundancer 48 and I could use some help and advice as I need to pull my starboard after-cooler from my Cummins QSC for maintenance. Pulling the after-cooler doesn't seem that difficult but there has to be some secret to getting myself in a position to do it. It looks like I may have to remove the Exhaust tube just so I have room for my body.Hi everyone,
My salon freezer ice maker water line started leaking today. The leaking water ran aft outboard or perhaps under the stbd side cabinets until the water dripped down the forward stbd lazarette bulkhead.
I found an isolation valve in the water maker water line tucked back in the aft outboard corner under the salon sink. Thought I'd let everyone know it's there.
Next step is to pull up floor boards so I can slide the freezer out to repair the water line.
I pulled all of the access covers in the stbd cabinets and didn't find any water so I don't know how I'm going to dry the areas that got wet.
Sea Ray tech assist was very helpful. They sent me a very detailed power point presentation with photos of all the potable water lines. It's too large to attach here, but I'll email it to anyone who wants it.
Steve