The only way that can possibly work with an isolation transformer is if:As previously mentioned, If you have an isolation transformer then you need a reverse y adapter. For example, Marineco
Reverse Y Adapter, (2) 30A 125V Males to 50A 125/250V FemaleRY504-2-30
Thanks
Mike
1. you plug both 30 amp plugs in to the dock system
2. the dock pedestal 30 amp receptacles are out of phase.
Not a good solution at all.... And, should your marina be updated with ground fault protection this would probably be tripping the marina's power due to no equal return current on the 120 volt neutrals.
Last edited: