GCHOG
Active Member
- Mar 25, 2016
- 149
- Boat Info
- 2006 Sea Ray 260 Sundancer
- Engines
- 6.2 Bravo III
Great idea using the "Kroil", I like it better than PB Blaster, I use Kroil almost daily at work. As far as bolt extractor's, be very careful. Those manifold bolts are only 3/8". Drilling them out you need to dead on in the center, not much room for error. When using the ez-out, go slowly. They are hardened and if you break it off you are not going to be able to drill it out,(been there, done it). Using a lot of Kroil is a good idea. BTW, Napa has a couple of good sets of bolt extractor kits. Good luck, and have patience.