quality time
Well-Known Member
- Oct 30, 2007
- 2,366
- Boat Info
- Miss Stress
2006 50' Post
- Engines
- Series 60 Detroits
I bought them from Marinebeam but now that I think about it, I had to remove them because they didn't work well with the dimmer.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
All of my cabin and bathroom doors have this mechanism inside them. I swapped the bad one from the bathroom for the laundry room for now, as that is the one least in need of a lock.Which door is this for? I don't think i have any doors with that particular mechanism.
The parts manual says 44lb galvanized plow. Not sure what brand they are but mine works great. Had six boats hanging on it Saturday.
Does anybody have a mixing valve on their water heater? My old 380DA had one but this boat does not and the hot water gets up to about 135 degrees. The PO did some plumbing work on the heater so not sure if he removed it. I need to tone it down with my young kids.
Ours get super hot as well and we do not have any type of mixing valve on the tank either. What about changing the thermostat on the tank?
Great idea, that may be the simplest approach!
Mine had one set on when we purchased it but I added shaft brushes and did away with them altogether.
I called Sea Ray from the boat yard while they putting them on and got the support tech for our 480's, had to put him on speaker phone for the boat yard guys to hear him say it, he said Sea Ray does not put them on the year/model I have (04/qsm11s) and not to use them, the galvanic isolation system should protect them.My boat doesn’t have any, and i believe we’ve discussed this earlier in the forum. I think we came to the conclusion that most of us don’t have them at all.
Many people add them, but Sea Ray says they are not necessary. If they come loose and slide down to the CB, they can cause it to fail. I caught one of mine just in time..
I'm with Aaron about adding brushes to the shafts. Aaron - are they easy to obtain and set up? I've not looked for them yet...