Recent content by guye926

Hi Bennett, thanks for the info!

Wow, beautiful boat, would like to hear more about the domed lettering, my "420" on the starboard side transom and the "420 Sundancer" at the base of the arch on both sides is very faded and Sea Ray says there's no way to get that part #. Any ideas would be appreciated, same color needed...

Mirror like those showing or something of similar weight, bulkhead is vinyl covered.

Hi Hawk, wondering if you did this and if so how'd it turn out?

See lot's of 42/44 DA's with a mirror or something heavy hanging in this spot (see below). The shower is on the opposite side of that bulkhead. Any trick to hanging something safely there? Thanks!

Looking for the same actuators/rams for the hatch lift, as well as the mounting brackets. Part # SR-0-18-24.50A

https://www.yachtworld.com/boats/2006/sea-ray-40-sundancer-3661510/

Hi, looking for the rear bolster, and possibly the stern cushion as well for a 2002 340 Sundancer. Part numbers and descriptions are: 1202944 BOLSTER, 340DA-99 FWD FACING GSW/GLD 1206093 BOLSTER SKIN, 340DA-99, FWD FACING 1202936 CUSH, 340DA-99 FWD FACING GSW/GLD 1206077 CUSH SKIN, 340DA-99...

Hi, looking for the rear bolster, and possibly the stern cushion as well for a 2001 340 Sundancer. Part numbers and descriptions are: 1202944 BOLSTER, 340DA-99 FWD FACING GSW/GLD 1206093 BOLSTER SKIN, 340DA-99, FWD FACING 1202936 CUSH, 340DA-99 FWD FACING GSW/GLD 1206077 CUSH...

Re: 340 SUNDANCER THREAD: 2002 340 Sundancer "forward bilge pump"??? Thanks, well, it's not the cover as it hasn't rained much (fortunately) in weeks. Drained most of my fresh water but will check again today to see if the carpet is still soaked. In the aft cabin, facing the stern, carpet is...

Re: 340 SUNDANCER THREAD: 2002 340 Sundancer "forward bilge pump"??? Anyone know about the "Forward Bilge Pump". I've located it under the aft compartment floor, but only because the carpet was soaked. Water getting in somewhere but can't track it back. Maybe coming from the main bilge? Where...

Anyone with a 2000-2003 (or later) 340 Sundancer with experience in mounting a flat panel TV to the bulkhead over the entryway to the aft sleeping cabin? Any input on size, mount, wiring, AC/DC would be helpful. I've searched the threads so I have some info but not a lot. Also trying to tie in...

Add the 4 blade Nibrals to the 6.2s and it will plane on demand with lots of space in the bilge vs. the bigger blocks...

Looking for Camper Cover Structure for 2002 340 Sundancer

Just Ducky, you were kind enough to reply to the post below. Can you explain exactly what it is that I would google? Really need to get this fixed, like driving blind at night..... Thanks.