I am not familiar with the 44 but I thought I would let you know on my 45, I found a second outlet on the underside of my upper bath cabinet ( facing down). Just thought I would throw it out there. Hope you find it.
I had a similar problem with my port side monitor after a 5 hour trip. I had checked the levels before starting and they were at the proper level. It was my first long trip since purchasing the boat 4 months earlier. I had a mechanic look at it and he couldn't find anything wrong. He drained a...
About 3 weeks ago I was cruising and an error code came on the vessel view screen " CCM LEVER 1 Multi Sensor". I started losing rpm in the stbd engine until it went to idle. I got back to the slip and called my mechanic. I had to travel out of town right after it happened so I told the mechanic...
I had this problem with my front unit as well. Strainers and lines were clean. It turned out to be the pump going bad. The discharge looked like it was good, but when I put the new pump on, it had a much higher flow. Also, when the ac was running, the pump was very hot.
It was time to get the bottom painted on Plans & Specs. I had Prop Speed put on the running gear. Here are some Pics ( I hope I upload them correctly!!)
Haul Out
Before
First coat with running gear stripped
Final Coat
Prop Speed on Running Gear
We have been to the Miami show a few times. We go to the convention center on Friday and walk the new boats. We also check out the electronics and the exhibits upstairs. We then grab dinner down on Lincoln street by the convention center. Saturday we walk the brokerage show down Collins ave...
Hello Everyone,
We have an electric actuator on our bed that retracts it about a foot to allow for more space at the entrance to the bedroom. We went to use it this week and it does't do anything when the control is pushed. I checked the breakers and they are all on. Is there an in- line fuse...
Scott,
i just made the jump to a 450 this year. As frank mentioned in an earlier post, insurance can be a big cost, especially in FL. I'm paying 4800 per year. In the Great Lakes I would be paying about 1/2 that amount. Slip 8500, clean/wax 2500, maintenance 3500.
no matter how new the boat is...
I put my hand on the charger and it was vibrating. I didn't know it had a fan in it. If it is the fan, it is pretty loud. I could hear it in cabin with engine hatch closed. Thanks for the reply.
"Plans & Specs" was delivered to Marina Jacks last week! We have had a great time boating the last few days and practicing our docking. Got a little overwhelmed with all the information at once but it will sink in eventually! I had a question regarding the battery charger. The last 2 times we...
It was kept at Legendary Marine in Destin. What a cool place. It can store up to 50' and it cost less than most wet slips in this area.
the place is huge. I wish Sarasota had a place like that.
The name is going to be "Plans & Specs". ( I'm a contractor)
Thanks for the replies. Yes, it seems like the hurricane issue has most Insurance Companies on edge down here. I ended up going with Odyssey Thru Mariner's ( Jerry Norman) for 5,600. They just wanted a Plan from the Marina and didn't require a haul out. As JustUs2 mentioned, Still about twice...