Recent content by JD stalker

So if I’m reading this correctly I should be buying ngk7164. Has anyone else used these? 350 mag 5.7 2006 320da

Ac41-932 have been discontinued and outdated twice. What is everybody using in there 350 mag 5.7 ltrs now?

I’ve only had the boat for a couple of months. Yes I use the trim tabs but when I have eight or nine people it takes a very long time. Yes it still gets up to 4500 RPMs

I have a 2006 sundancer 320 with 350's v drive. It takes a while to get on plane with a few people on the boat. I would like to overcome that. I have found the procharger kits for 6000 each. They add 180hp. I have a few questions. 1 will the transmissions hold up. 2 how much stress will this add...

R-and-R Thanks for the info I just watched the video on how to replace those. I hope its as easy as the video shows. Thanks for the help.

I have a 2006 320 V drive 350's. My trim tabs work on the port side but not on the starboard side. I can hear the motors trying to move when sitting in the slip but under way only the port side works. Anyone ever experience replacing or trouble shooting these? Any info would be greatly...

I checked the inlet power line and it has power coming in but none going out. If the smartcraft system completely fails would my regular gauges continue to work or would they die like they are now? ie rpm, fuel, oil pressure

I have a 2006 sea ray sundancer 320. I had a new stereo system put in. The very next day my info center (center dash) module stopped working. Therefor none of my gauges work. I have power coming into the module but none coming out. I keep my boat in the water and I run it weekly. So it wasnt...

scoflaw I did that however it only shows single engine's not dual.

I have a 2006 SR Sundancer 320 with 350's with V drives. The hose on the port side coming from the raw water pump to the cupler. It than V's off to the starboard motor. The hose leaned up against the pulley and is now leaking. I cant find a diagram or explain it well enough to find the part...