Recent content by John-Burgess

Generator is the same model, Kohler 5EKD, as the other member who was experiencing the same problem. Thanks for the info regarding to ability see the fault code by scrolling through the event history. In my 2008 Sundancer generator faults always showed a code in the window rather than high...

Thanks for your reply. There is no code number displayed just "Fault Check Engine" displayed on the generator screen. I removed and cleaned the pressure sensor. Didn't help so I replaced it and still displaying the same code.

Sorry but that boat was a nightmare and I traded it in shortly after posting. I don't recall what the solution was.

Hi. I have the exact same problem. Starts and immediately shuts down. Generator display says Engine Fault while cabin display says Aux Fault. I have verified that this is not related to the CO detector (it works correctly and I have jumped the white wires on harness together and even...

Sorry. Meant to write I jumpered NC (normally closed) and Common.

Hi. I know this is an old post but did you track down the problem. My generator shuts down immediately with AF code in the cabin panel. No issue with CO detector (tested) and jumped the two white wires (common and NO) which bypass the relay and CO detector and generator still reports AF and...

Service tech replaced my old generation CO detector with the new CMD5 and also installed the RCM5 relay 3 years ago. Worked fine but yesterday my generator will not start and reads AE for Aux Input Fault likely due to the CO detector. CO detector appears to be functional with green light ever...

Mechanic diagnosed the problem to be a bad fuel module. Service department indicated that the unit is on backorder from Mercruiser until next week. Boating season just got a couple of weeks shorter.

I really appreciate both of your replies. This makes sense given other parameters were normal. Mechanic will do a computer readout and then fuel pressure test next week. I went to boat this AM just to look around to see if I accidentally pulled out a wire or hose when I replaced the rear...

My 2010 Sundancer 370 with 8.1L w/outdrives has developed a repeatable problem. Attempting to get onto plane with throttles at 3800 RPM and approaching 15 knots the port engine RPM's drop down to about 2600 RPM. Moving both throttles to WOT, RPMs start increasing then port engine shuts down...

I float a 3' inflatable toy alligator that I bought on Amazon tied with fishing line to my swim ladder mount. Took care of the problem immediately.

I'm considering a 2011-2014 370 Sundancer with Sea Core Axius Bravo III drives. I have not owned a boat with Axius drives before. I have 3 questions: 1. Last Sea Ray I owned (V-Drive) had risers, elbows and manifolds which required replacing every 5-6 years (salt water use). I read that...

2008 330 5 Front Eisenglass Panels for Sale $100 Plus Shipping- Used less than a month I have 5 replacement panels that were used on my boat for less than a month. I bought the boat in August 2009 and the original eisenglass that came with the boat was very scratched up probably from being a...

Has anyone replaced their Cockpit and Arch lights with LED bulbs or fixtures? Screws getting pretty corroded and have not pulled a bulb to check the number yet. Would be interested to know the bulb details as well as how you like the LED's compared to the factory supplied bulbs. Thanks.

Hi Art. Have not been on the forum for awhile and just saw your post about the A/C. Hopefully your A/C system is working well now. I had to have mine replaced 2 months after I bought the boat in August 2009 (2008 leftover). It was a major ordeal to get the unit out and the new one in as...