Recent content by Tom Minnick

  1. T

    Motor clicks and I have to use emergency switch

    My 2005 340’s starboard engine starts fine port clicks. I have to use emergency switch. When running the battery gauge for the starboard stays constant, the port fluctuates back and forth 1 volt..???? Confused
  2. T

    Merc 8.1s slave cylinder location

    Thanks on my way down to the boat will take a look and see if that's where it's at
  3. T

    Merc 8.1s slave cylinder location

    Absolutely that's the one I got. Can't find it on the engine. My mechanic says it's easy to find
  4. T

    Merc 8.1s slave cylinder location

    Have a 2005 340. Where on the engine would it be
  5. T

    Merc 8.1s slave cylinder location

    Sorry fat thumbs Slave Solenoid
  6. T

    Merc 8.1s slave cylinder location

    Sorry gat thumbs. Slave solenoid
  7. T

    Merc 8.1s slave cylinder location

    Where is the slave cylinder located for an 8.1s merc
  8. T

    It takes 20+ times pressing the start switches to get motor to engage

    Strange. Still working on problem. Had a half hour free so I went to boat to find slave solenoid but had no luck. Decided to try to start motors. Hit toggles and fuel pumps engaged. Got distracted and about 90 seconds later got to fully engage toggles and both motors started. Stayed for an hour...
  9. T

    It takes 20+ times pressing the start switches to get motor to engage

    Thanks I will test slave solinoids
  10. T

    It takes 20+ times pressing the start switches to get motor to engage

    Just hear a click (if i take shiftier out of neutral of course no click) no other issues, Started last year with port engine. I would have to push toggle switch 5+ times to start Now this year progressively worse and both switches.
  11. T

    It takes 20+ times pressing the start switches to get motor to engage

    Batteries are new within last 18 months
Back
Top