In the four seasons we have owned our 36DB, I have had to replace the Generator Solenoid, Impeller, and reboot the EPLEX system. My current problem with our generator is the data is not appearing on vessel view. What exactly the problem with your generator?
You're very welcome! please consider joining FB page https://www.facebook.com/groups/5378158468949937/?ref=share_group_link for faster and more helpful informatioin.
Address 260 is N19 Module #31
Address 562 is 428 RSP Module # 32
See above post for locations
Download:2008 Sea Ray Bridge 36 parts manual,/Sedan Bridge 36 Parts manual
page 99 for locations
page 100 for modules and address'
1.The EPLEX system is very sensitive to low battery voltage.
If you can verify the batteries are fully charged and the system is not responding, do a hard reboot.
Also, if a light is ON when the batteries are turned off, it will remain ON until you turn OFF the light WHILE THE BATTERIES ARE ON...
Thank you JasonP!
My pump is pretty loud, do you know of an alternative?
Also, do you know if its safe to upgrade to a pump with greater GPM, or higher PSI? (aside from faster water usage)
I have the same boat- you literally have to lift the stairs up from the bottom step, and the first time I lifted mine took every ounce of strength I had!!!
Just wanted to make sure you have seen the document above "Changing batteries and hard reboot". It goes through the proper sequencing process required to get the Eplex system working after changing batteries. I haven't had to do that yet, but I have heard it is important to follow.
Tom
You sound pretty versed with the Eplex system but just a few tips that may help:
1. Are your batteries Good? I have had problems with my Eplex system with low battery charge.
2. Are your Battery switches on and working?
3. If a light is on, and both Port and Starboard Battery Bank switches...