I’m hoping someone responds to your question on the engine data and if possible, is it a simple harness adapter? I’m particularly interested in the Garmin possibility as last year (first season with the 340), I installed a Garmin GPSMap 942xs in the left panel of the dash. I wanted to put...
I am curious if you replaced the water inlet/regulator with a higher psi? I have found I have better pressure from the pump than from a dock hose, regardless of what marina I’m at. Curious what regulator you installed if replaced (my pump is 55 psi).
I have a 9’ AB Lumina dinghy with a Tohatsu 10hp motor. Weighs maybe 250 lbs. I have A Presto Marine hydraulic lift that I mounted last year when I bought the 340. I had the lift on a bigger boat I had 5 years ago. The lift itself probably weighs 250 lbs, including the pump. I was concerned...
I have a related, but different issue. Mid Last year my windlass was doing the same as what was described above. My service marina thought the solenoid in the engine compartment was bad and replaced it as the helm switch would turn on, but no difference. They eventually were able to switch the...
Just took a 2 week trip on our 340 and had the same issue. This confirms what I suspected might be the issue. Unfortunately, it appears the weight of the water also partially tore the hose where it connects to the vent fitting. Anyone know where to buy a new vent fitting? (louvers are missing on...
Did you ever get this issue resolved? I bought a 2006 340 Sundancer this year with 496’s and Bravo 3 sterndrives. I inherited the same problem - what I thought from the beginning was cavitation during acceleration and at cruising speed in anything but perfectly calm seas (Great Lakes). Below...