Courtesy Light Replacements

Aaronpav2001 · Apr 1, 2021

All,
I am looking to replace my courtesy lights on my 2002 320DA. I would like to keep the same size where i don't have to drill or cut. Would like to replace with LEDs. Any recommendations with links to purchase? Would also like to do the transom light which seems to be a bit bigger (3 inches). Thanks all.

The pics show what I have in there now

Shoyrtt · Apr 1, 2021

Have you thought about just cleaning up the Perko rings and the screws and replacing the festoon bulbs with an LED version? I did that on my boat and have been happy with the lighting. The bulbs can be purchased at your local auto parts store or online. Go figure, West Marine has them for $15 which is $5-6 more than other vendors.

Aaronpav2001 · Apr 2, 2021

That would be ideal but I haven't had much with cleaning the corrosion / green stuff off. Any suggestions on what to use? Thank you!

dtfeld · Apr 2, 2021

Aaronpav2001 said:
That would be ideal but I haven't had much with cleaning the corrosion / green stuff off. Any suggestions on what to use? Thank you!

Bar Keepers Friend. Or find a local shop to put a hard chrome electroplating on them.

New lenses can be purchased online.

I just bought some RGB LED lights with a remote...works well.

The Bill Collector · Apr 2, 2021

https://www.ebay.com/itm/133593016220 all 4 for $25 inc shipping

Sidewinder770 · Apr 5, 2021

The ones listed in ebay are not stainless. I just replaced all mine with these- very bright and easy to replace. Might be a little different than yours but check the measurements to compare. Can't comment on how long they will last yet-

https://www.amazon.com/gp/product/B089XW7BM4/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

nealtrombley · Apr 7, 2021

I used Shadowcaster DL series.. RBG very nice

https://www.shadow-caster.com/products/above-water-marine-led-lighting/marine-led-down-light-scm-dl/

Lazy Daze · Apr 7, 2021

Try Perko's website - you can compare your current cut-out hole size to the new product's specs. You can clean the green "verdigris" off and sine them up, but the pitting will remain. Keep up on waxing them and you might keep the green from coming back... or spray them with clear (will work for a while, but might peel eventually).

dwna1a · Apr 7, 2021

These can be cleaned and the LED bulb will work. Also, or, you can replace those using a stern light lens

Courtesy Light Replacements

Aaronpav2001

Member

Attachments

Shoyrtt

Alamitos to Avalon

Aaronpav2001

Member

dtfeld

Water Contrails

The Bill Collector

Well-Known Member

Sidewinder770

Member

nealtrombley

Active Member

Lazy Daze

Well-Known Member

dwna1a

Well-Known Member

Forum statistics

Connect with us