Search results

I didn't want to hijack the other thread so I made a part 2. I also have a issue with a 12 receptacle not working. It's in a 2000 290 DA. I have 2 receptacles, one at the helm and one under the stereo in cabin. The cabin is the one that isn't working. It's labeled 590 and I've traced the wire...

So yesterday my genny sucked up some seaweed. I heard the sound change in the exhaust and shut it down right away. After cleaning the stainer I went to restart it and it will only run for 2 or 2 seconds. I have good water flow, impellar is fine. Oil level is full. WTF. I think maybe one of the...

I know that the Port or Starboard engine will consume different amounts of fuel but I'm wondering if mine are more than acceptable. On plane at 3,300 rpms with medium load I'm doing 24 knots and using 8 gpm on Port engine and 11 gpm on Starboard. No noticable issues w/ anything, recent tune up...

After reading Wetpaints post on the lack of customer service by Walker Bay I have changed my mind and I won't be purchasing one. My other choice was a AB 9'6" fiberglass botom RIB. It's the Ventus 9 VL. If anybody has any experience with one or AB, please let me know as $3,000 for a dingy is...

Me and the family spent the last month in the San Juans bobbing from one island to another. Great weather the whole time and as usual, met great people everywhere we went. Can't believe how much I miss it when we have to come home. Here are some pics of the S/V Odyssey on a rock at Sucia.

When I start my engines I used get a two beep alarm when I first turned on the ignition to each engine. Now I only get one on the port engine. Any body got any ideas? Thanks, Russ.

So I'm reading the manual on my windless and it says to secure anchor to cleat and not windless when deployed. Do you guys use a jumper or how do you attach cleat to anchor chain? My first 100' is chain and I often anchor in 12' of water w/a tight scope. Any help would be great.

I'm getting ready to install a Lowrance LMF 400 fuel flow meter and have to put a sensor on each fuel line. My boat is a 2000 w/ 5.7's and the fuel lines are fitted w/ plastic braid covering. Are they high pressure or just very well built? Can I cut and install the sensors on these lines with...

Where do you guys get kohler parts at? I can't find a impeller kit for my sherwood gp 8001 pump any where? Thanks for help.