Search results

Trying to find out the brand of hatch in my 1992 330 EC - Sea Ray. I would like to purchase a Oceanair type of Screen/Sun shade for the hatch above the v-berth. I can not find any markings as to the brand of hatch - would anyone know which brand the factory installed in 1992? Bomar , Lewmar ...

Thank you SB in GP . This weekend I will check the line for leaks. I did not think it was normal , but I don't understand it enough to know the difference.

On the topic of fresh water systems and pumps. Once the water system is turned on - Is the Pump supposed to run constantly or is it a "on-demand' type of system? I had installed a new Shur -flo pump in my boat last season - I have just recently noticed that it really never turns off until the...

Politically correct = Lying

How about the Hollywood casino in Toledo? , I see it is located on the Maumee river - Is there any dockage available near by?.

Yes , located next to the Rock & Roll hall of fame in downtown Cleveland - You can dock at North Coast Harbor Marina.You can basically walk to everything in downtown Cleveland. Horseshoe casino , hotels,all pro sports stadiums , restaurants , museums , grocery stores ,etc..... There are actually...

The Ice Maker is sold. Paul

RARITAN ICE MAKER , Excellent used working condition. The unit was checked out by Sorgen's Refrigeration in Port Clinton , OH - everything in perfect working order. Model 83B1 - Model 83 Raritan Icer-ette Unit is 14" wide , 24" tall and 14 1/2" deep. I have photos i can send. Please let...

I agree with GaryHill and Craigalan on this - use your boat. I fish from my boat and other than the fishing rods and tackle stowed away - you would never know it. I do not think the OP is looking to use his boat as a charter or take out 10 buddies at a time fishing. He is not going to be ankle...

123

"Yes, the wet cores were traced to using butyl tape as a bedding medium." Lets face it - the reason cores get wet and rot is not due to the type of sealant , but caused by exposed wood in the thru holes for hatches and screws on the deck - this goes back to the way the boats are built in the...

I caulked one half of the boat , then removed the tape after letting it sit for a few minutes. Than I did the same on the other side. I had taken my complete Rub-Rail off the boat, cleaned the boat really well using razor blades and a 3m eraser on a cordless drill , then wiped everything down...

On my boat I used 3M Marine Adhesive Sealant fast cure 4000 UV. I think it worked well. To me it looks like the right choice. from the description : 3M™ Hybrid Adhesive Sealant Fast Cure 4000 UV is a one-part sealant that cures to form a firm, rubbery, waterproof seal. Its flexibility allows...

I didn't use silicone - it may act differently . The surface needs to be clean and dry before applying anything. I wiped everything down with acetone before applying. This is a situation where more is not better when using the sealer , you want to use just enough.

To achieve a nice clean / neat caulk line - Something that worked well for me was using blue painters (masking) tape. I taped off the hull on one side and the rub rail itself on the other creating a 3/16" or so gap. Apply the sealer into the corner - smooth it out with a wet finger or wet cloth...

If moisture can not reach the coring material - it would never rot. It should be sealed even before any bedding product is applied.

"Just take the time, do it right…..and clean up the mess because if you do it right, it is messy". Is this with the Butyl Tape?. In my opinion - i think that Butyl Tape - when applied correctly -would be a superior product for re-bedding compared to all the Sealants , adhesives , caulks and...

Dave, I was able to buy everything for mine from Marinemax in Catawba/Port Clinton. Talk to Thad in parts. I believe they order straight from the manufacturer. Paul

I had Monak Marine Surveying survey my boat before i bought it last year , very knowledgeable and thorough. I would highly recommend Dave, he is located in Huron - 419.656.4680. Paul

mpdeb1. I have a 92 330 which I believe is the same boat. I took this panel out a couple weeks ago on my boat. My armrest , drink holder and the main panel ( one you are asking about) were pretty waterlogged and rotted. The armrest was filled with water when removed. Anyway , I gave mine a good...