Search results

  1. G

    Official 1980's Weekender/Sundancer 300 thread

    I need a recomendation for a new throttle control unit on the dash of a 1987 Searay 300 Sundancer. I have had it 33 years. I recently replaced all the cables to the 5.7 engines and outdrives (Throttle, shift and shift thru transom). All Gen1. I now need to replace the old morse control unit...
  2. G

    Official 1980's Weekender/Sundancer 300 thread

    1987 300 Sundancer - Hello again. Have not been on the site in a while. I could use some help. Water is slowly leaking into the midcabin and aftcabin sump pump areas. It is actually coming in from under the fiberglass in the bottom or the side of the sump pump areas. I removed the...
  3. G

    1987 300 Sundancer Water Tank Question?

    My fresh water tank is leaking on my 1987 SeaRay Sundancer. Does anyone have pictures or a detailed description of how to remove it? Any help is greatly appreciated.
  4. G

    Official 1980's Weekender/Sundancer 300 thread

    Rub rail leaking on 87 300DA: Water is leaking through the rub rail. I removed the cabinet over the galley and the rub rail .75 by 1.5 inch wood backing strip is wet and deteriorating. I am going to remove the exterior aluminum rail and replace the internal backing strip. Any suggestion on...
  5. G

    Official 1980's Weekender/Sundancer 300 thread

    Has anyone installed A/C? I plan on keeping my '87 300 SunDancer and would like to have A/C at the dock (no generator). Any experience would be appreciated.....
  6. G

    Official 1980's Weekender/Sundancer 300 thread

    Three step swim platform ladder. For some reason the two step swim platform ladder keeps getting shorter as I get older. I would love to find a three step ladder that would fit the mounting connections on the swim platform. Has anyone found a longer ladder that works well? Thank........gck
  7. G

    Official 1980's Weekender/Sundancer 300 thread

    Need some advice: I have 1987 300 Sundancer which I bought in 1991. Last year I repowered it and put on new outdrives. Great boat. My one issue is that there are leaks along the starboard rub rail. My idea is to remove the aluminum rub rail and fill the deck hull seam (as much as possible)...
  8. G

    Official 1980's Weekender/Sundancer 300 thread

    I am new to the forum and have just completed reading all the posts on the Official 1980's Weekender/Sundancer 300 thread. It was great fun to see what fellow owners did with their Sea Ray 300s. I have had mine for about 20 years, it is still a perfect boat for us and would like to share some...
Back
Top