$300 Mistake
See the switch circled in white.... Its a bypass switch, I never even noticed it. Called service, guy showed up, flipped the switch, sent me a bill for $300 to get the remote switch to turn the genset off. Switch didnt appear on any diagrams that I could trace.
Chalk it up to a...
Hi folks... I have a 97 SR400 Sedan Bridge... Since I purchased this a few months ago, the only way to shut down the Westerbeke Genset (Monoplex Gen-Set 4) is by opening the hatch and manually pressing the stop switch. I am following the schematic that ttmott posted, but no luck... Any ideas...
Hi folks, i have a scanned set of docs for most of the wiring and some of the structure for a 86 sea ray sport fish... I spent a few hours on the phone with sea ray, and someone found about half of the build manual and sent it to me... I suspect it may have been Doc, never got his name...
I...
Thanks for all the replies... sorry it took so long for me to get back to you... I was traveling most of summer for work, when back in NY was on boat!!
So to let you all know what I wound up doing....
I looked at the platform in NJ craigslist... it was homemade and needed a lot of work..
I...
Rebuilding my Old 86 390 Sport Fish... cat 3208ta. looking for some guidance. At 2500 rpm I am getting 17 knots. (WOT)2600 19 knots... This seems slow to me, looking for feedback from others what speeds they get. Additionally over 2400rpm stb motor runs hot 200+ and sets the over temp...
Thanks for the info, I too have the Cat 3208TA's and a Westerbeke Gen.. I sit low as well, which brings up another question, I sit about 5 degrees off center to port, odd... but I will ask that question later...
I chose the Marine Plastics platform for this project mostly due to the fact that...
Al
Looking to mount a new swim platform on back of my 390 Sport fish. I recall (somewhere in my crazy brain) you mentioning you wanted to raise yours? How high did you go?
Also before I place final order, does anyone have the measurements of their platforms off of their 390. I was planning...
Awesome thread... Thanks for spending the time putting this up. In the hour I just spent looking at the posts, you have answered a few of my nagging leak questions already.
I just started my second restoration project... a 1986 390 Sport Fish.. Cat 3208's, but boy oh boy does this one need a...
Restoring an 86 390 Sport Fish.
Looking for many parts for her.
Quick list of things off top of my head
Swim Platform
Bow Rail
Port Side window
many of the interior components
Fly bridge dash panel
Let me know what you may have, I will probably be interested....
I had same issue on mine, plus an odd smell.
here is how I got mine out. If I can get down to the boat I will take some photos.
take door off, makes life easier.
two recessed screws on top and bottom about 2 inches long - lord knows why, they only needed to be a half inch.
then remove the mesh...