We have the front anchor under the port bow cushion and the rear anchor where the cooler would go by the battery. We park stern to current at the sand bar so we use two all the time.
I've been disappointed with the stereo at the helm, speaker positioning just isn't good to be able to hear at speed with guests on the boat. I've got an extra set of the Rockfords to put in. Have any of you guys put in a third pair of speakers? Was thinking below the throttle on the starboard...
I haven't had any problems with the snap on covers towing a couple thousand miles.
I believe he's talking about the over the rub rail mooring cover that doesn't have snaps. I have one, but haven't towed with it yet on long distance. It did not have any problem at ~40 mph from storage to my...
I'm not sure if there are any intricacies with the OB cover by the motor, but I believe the mooring cover is supposed to be good to trailer.
It's got two support poles, there's a Velcro system that allows it to include the Bimini while it's installed with clips on the nylon strap hidden by the...
Took some planning and measuring, attached. I can try to find the order with dimensions if you need them. On our 19, but would imagine it's the same.
Got a nice set of registration numbers from the same outfit.
Picked up the OEM mooring cover, and pleased with the quality.
I reached out to Great Lakes Boat Top who did the stock canvas and they connected me with their sister company Westland Covers who did the mooring. This is the Sea Ray part number they pulled from my HIN.
It’s synthetic...
2017 is the latest for the 19: https://s3.amazonaws.com/srweb-pvt-prod-us-east-1-294962523550/static/parts-manuals/2017_2017-SPX-19-Parts-Manual.pdf
If that link doesn't work https://www.searay.com/us/en/owners.html then scroll down to Resources.
You can go to the owners section of the sea ray website and download the latest available parts manual. That will give you a good idea of the trolling setup that SR offered, as well as the front casting deck setup.
You are in ATL? There is a risk of a little water in the motor after drain...
I’m sure it’d be a lot cheaper to use 12 V LED waterproof strips from amazon, but here’s the part numbers for the 17, may want to confirm they’re the same. There’s also the cup holders that are lit.
INDIRECT LIGHTING
2119899 LIGHT, LED DIFFUSED TAPE BLUE 44"
Used with SELECT PACKAGE OPTIONS...
They revised the model number on the I/O in 2017 from 19 SPX to SPX 190, but a significant amount of the parts are the same. Not sure of OB specific tweaks from 17-19, but here's the 2017 OB Parts manual from SR...
If it makes you more comfortable, I've done about 2k miles of interstate trips with the two piece snap downs with no issues. If the clamps on the posts are loose, they'll push down a little, but not really an issue.
Watch out for road tar if you have to go through construction. Not fun to get...
Does your HU have Bluetooth? If so, I would highly recommend adding an amp as step one. There is little quality impact from the HU once you eliminate the on board amp. And if the speakers can actually handle 60W RMS you’ll be able to push them decently hard as long as the signal and power is...
The base stock Rockfords are holding up well to 50W RMS Each (I completed the set of 4, as the base system only had two speakers). I put in a 50x4+300 Kenwood Marine amp In the locker under the head unit. Just threw a 10” bazooka marine tube in the starboard storage compartment by the motor...
I used 3/4 because it matched the base from the stock seat. It's a reasonably snug fit, so you may be able to get away with 1/2", but you may get some rattling if it's a little loose. If it ends up loose, maybe a good answer would be to find something that you could use on the contact points...
That looks to be the stock prop,
Parts manual for the 2018 page 72
https://s3.amazonaws.com/srweb-pvt-prod-us-east-1-294962523550/static/parts-manuals/2018_2018-SPX-OB-21-Parts-Manual.pdf